FAS and V-Series Storage Systems Discussions

fcp start: Partner WWNN must match local WWNN to start FCP

KCOKYAMAN

When i try to start FCP service get a following error message...

MC-Netapp-A> fcp start

fcp start: Partner WWNN must match local WWNN to start FCP

I checked Partner but match with local nodename...

MC-Netapp-A> cf partner

MC-Netapp-B

MC-Netapp-A> fcp nodename

Fibre Channel nodename: 50:0a:09:80:88:e3:c6:01 (500a098088e3c601),

MC-Netapp-B> fcp nodename

Fibre Channel nodename: 50:0a:09:80:88:e3:c6:01 (500a098088e3c601)

MC-Netapp-A> version

NetApp Release 8.2.1RC1 7-Mode: Wed Nov 20 15:25:04 PST 2013

My storage is FAS3220... What is the problem? Any idea?

3 REPLIES 3

Re: fcp start: Partner WWNN must match local WWNN to start FCP

radek_kubka

This is odd. Can you try changing WWNN on both nodes to a new value & see what happens then?

> priv set diag

> fcp set nodename 50:0a:09:80:88:e3:c6:02

> priv set

Re: fcp start: Partner WWNN must match local WWNN to start FCP

KCOKYAMAN

yes... I tried set nodename with same wwnn. nothing has changed.

Re: fcp start: Partner WWNN must match local WWNN to start FCP

KCOKYAMAN

Solved... This is interconnect problem. When fix interconnect connections FCP started.

View solution in original post

Earn Rewards for Your Review!
GPI Review Banner
All Community Forums
Public