Microsoft Virtualization Discussions

Replicate FAS3240 to Azure ONTAP 9 possible?

ChristiaanBrinkhoff
7,220 Views

Hi,

 

For a future cloud project, i must connect the customers FAS3240 with the ONTAP version 8.1.4P8 7-mode to the Microsoft Azure Cloud ONTAP Management server to provide replication over the SnapMirroring technology.

 

Now i need to now, if the version of the on-premises NetAppFAS (8.1.4P8) is supported to provice this replication, on the documentation i cannot find if the on-premises software must be on the same ONTAP 9 software level as the Cloud server.

 

Can someone provide me this information?

 

Regards

Chris

 

 

8 REPLIES 8

JGPSHNTAP
7,217 Views

7-mode will not go to the cloud

 

But if you figure it out, let us know

ChristiaanBrinkhoff
7,206 Views

You mean that it is not official supported, but their might be a change, so i need to try it?

JGPSHNTAP
7,190 Views

Unless you are doing a TDP to the cloud, at which I don't know..

ChristiaanBrinkhoff
7,183 Views

I will create a IPsec VPN tunnel to Microsoft Azure, deploy inside the VPN network the ONTAP Cloud 9 server and the NetApp Cloud Management virtual machine. Then i will try to add the on-premises FAS 8.1 device in the Management portal and try to replicate.

 

I don't know anything about TDP, the customer has iSCSI LU'N's and CIFs shares that must be replicated for a DSR solution. Is that possible, or do i need to try it, to know it works?

 

 

JGPSHNTAP
7,183 Views

Ok, that will not work. 

 

You will need ontap 9 - ontap 9, 

 

7-mode is legacy and will only replicate with a TDP (transitional snapmirror) for migration.

 

If you have live data on 7-mode you need to migrate to Ontap 9.  There is no upgrade plan.

ChristiaanBrinkhoff
7,180 Views

Ok, you are 100% competely sure on that? Also with a OnCommand Cloud Manager server in between?

 

I cannot find anything about the requirement of the ONTAP 9 software on-premises software...

JGPSHNTAP
7,174 Views

I will never say 100%, but just if i'm talking basics you cannot replicate between 7-mode and cdot unless its a TDP.

 

Ive been doing this a very long time so let's say i'm 99%

 

 

hill
7,147 Views

Hi,

 

So there two questions here that I'm seeing:

 

  1. will OnCommand Cloud Manager help with snapmirroring from an 8.1.* 7-mode system to an ONTAP 9.1 system?
  2. is it possible to snapmirror from an ONTAP 8.1.* 7-mode system to an ONTAP 9.1 system?

 

They're very similar but somewhat seperate.

 

My responses to the second question first:

 

  • JGPSHNTAP is correct, that there is no direct method for snapmirroring from a 7-mode system to an ONTAP (previously known as Clustered Data ONTAP) system
  • There are, however, some transition tools (7MTT - 7 mode transition tool) that are available to assist with the multiple phases of transition.  I also believe a PS engagment might be necessary, but I don't know for certain
  • I have heard that there are some unsupported procedures that some industrious folks shared on the internet for doing some 7mode to c-mode snapmirrors.  I repeat, unsupported... that said, those processes worked for the individuals I talked to.  Did I mention unsupported?

 

My response to the first question outlined above:

 

  • Cloud Manager is not a siliver bullet here
  • Yes, Cloud Manager will recognize physical ONTAP systems... 
    • so long as there is networking connectivity in place
    • but only clustered data ONTAP systems... no 7-mode
    • and only as far back as .... ONTAP 8.3.2

 

I'm pretty sure these weren't the responses you were hoping for, but I do hope they help.

 

Best,

 

Kevin

Public