Which api to find out RLM firmware revision

[dominicb]

I can't seem to find an API that exposes the firmware revision of the RLM card, it must be there somewhere....?!

[kvishal]

Hi dominic,

     The System-get-info API returns a firmware release.

cpu-firmware-release

string optional

Firmware release number. Defined  by the CPU manufacturer.

Is this what you are looking for ?

[dominicb]

Hi Vishal,

No, that api relates to the system firmware, what I'm after if the rlm card's firmware revision (the management port).

For example the output from a "rlm status" command through an ssh session on the filer shows the following:

Remote LAN Module           Status: Online

            Part Number:        110-00057

            Revision:           F0

            Serial Number:      491341

            Firmware Version:   4.0

            Mgmt MAC Address:   00:A0:98:11:99:D6

            Ethernet Link:      up

            Using DHCP:         no

            IP Address:         10.26.38.154

            Netmask:            255.255.255.0

            Gateway:            10.26.38.254

Any ideas which API can produce this output?

Thanks

Dominic

[kvishal]

I did some search in the API, was unable to find any API.

You could use the system-cli API to get the output of your CLI in a ZAPI. The API is unsupported but.

This is how you run it

<system-cli><args><arg>rlm</arg><arg>status</arg></args></system-cli>

[dominicb]

Thanks for your help Vishal, in the end I have just loaded the rlm status output into an array using powershell and referenced the element for the firmware version. This gets me what I need for the time being.

I would prefer to be accessing this info with a proper API call through a powershell cmdlet. Would you know if I could feed this back somewhere as an addition to a wishlist for pipeline work?

Thanks

Dominic

[kvishal]

you could file a RFE for this. But I am not fully sure, if the ZAPI is missing.

[cknight]

There doesn't appear to be an API for getting the RLM version.  As Vishal pointed out, system-cli is an unsupported API.  However, sending CLI commands via SSH is fully supported.

Although not as good as an actual API for RLM details, the forthcoming Toolkit 1.3 will do this:

PS C:\> Invoke-NaSsh rlm status

        Remote LAN Module           Status: Online
                Part Number:        110-00057
                Revision:           D0
                Serial Number:      391066
                Firmware Version:   1.3
                Mgmt MAC Address:   00:A0:98:06:E6:CA
                Ethernet Link:      down
                Using DHCP:         no
        IPv4 configuration:
                IP Address:         192.168.33.107
                Netmask:            255.255.248.0
                Gateway:            192.168.32.254

1.3 release date is "soon" but not yet finalized, so no use asking!

[dominicb]

Hi Clinton,

That is useful info, thanks.

[mskubski]

The API is not available. We just opend a RFE! We hope to get the RLM API supported soon, but we have no feedback at the moment. regards Maurice

[dominicb]

Thanks for filing that, appreciate it.

I'll keep an eye out, hopefully it will get added as I'm sure there are lots of people that will want this eventually.