Network and Storage Protocols

Igroup maximum numbers

saranraj456

Hi,

Is there any limitation in maximum number of igroups /host per controller>

Thanks, saran

1 ACCEPTED SOLUTION

madden

Please see the "SAN Configuration Guide" which is part of the standard documentation set for each Data ONTAP release. It is In it you will find a section titled "Configuration limits for FC, FCoE, and iSCSI configurations" which includes a variety of SAN related maximums per hardware type for that specific Data ONTAP release.  Here is a link to the aforementioned page for the 8.1.2 release to get you started.

Hope that helps.

Christopher Madden

Storage Architect, NetApp EMEA

View solution in original post

1 REPLY 1

madden

Please see the "SAN Configuration Guide" which is part of the standard documentation set for each Data ONTAP release. It is In it you will find a section titled "Configuration limits for FC, FCoE, and iSCSI configurations" which includes a variety of SAN related maximums per hardware type for that specific Data ONTAP release.  Here is a link to the aforementioned page for the 8.1.2 release to get you started.

Hope that helps.

Christopher Madden

Storage Architect, NetApp EMEA

Public