Network and Storage Protocols

Starting with netapp need help iscsi problem

SCHATTENZEIT
6,411 Views

Hello from Berlin !

I am new here, and I have a problem installing iscsi with netapp.  Maybe, general Problem
My system: two nodes with oracle Linux 6.5

 

When  I  run discovery, it seems to be ok:

#  iscsiadm -m discovery -t st -p 10.40.30.246:3260 –login
10.40.30.246:3260,2001 iqn.1992-08.com.netapp:sn.2014386705

But result of:

#iscsiadm -m node -T  iqn.1992-08.com.netapp:sn.201438670  -p 10.40.30.246 –l
iscsiadm: No records found

in the /var/log/messages I find when I restart  service:

#service iscsi  restart

Message:

 

Feb 17 12:21:26 dbb-n15-01 iscsid: Connection2:0 to [target: iqn.1992-08.com.netapp:sn.2014386705, portal: 10.40.30.246,3260] through [iface: default] is shutdown.

Feb 17 12:21:26 dbb-n15-01 kernel: scsi5 : iSCSI Initiator over TCP/IP

Feb 17 12:21:27 dbb-n15-01 iscsid: Could not set session3 priority. READ/WRITE throughout and latency could be affected.

Feb 17 12:21:27 dbb-n15-01 iscsid: Connection3:0 to [target: iqn.1992-08.com.netapp:sn.2014386705, portal: 10.40.30.246,3260] through [iface: default] is operational now

 

Maybe a newbie problem, but  I hope you can help me

Thanks a lot

Micha

1 ACCEPTED SOLUTION

SCHATTENZEIT
6,411 Views

Hi,

the problem is fixed:

we had to add the InitiatorName  to the igroup

View solution in original post

3 REPLIES 3

rwelshman
6,411 Views

What is the configuration on the filer look like in terms of assigning LUNs to those servers via iSCSI?

SCHATTENZEIT
6,411 Views

Hello Riley,

thanks for your Answer     The  LUNS are in a inititator group RAC_N15, cause I want to use them as

raw devices. Maybe there is a little bit more I have to do ?   We use Oracle  11g, but for a new project Oracle 12c (with asm)

RAC.

Greetings from Berlin

Michael

SCHATTENZEIT
6,412 Views

Hi,

the problem is fixed:

we had to add the InitiatorName  to the igroup

Public