Network and Storage Protocols

Volume Copy Procedure?

HENRYPAN2
8,939 Views

Dear NetApp Gurus,

Would you please share your procedure on copy volume within the same filer?

Thanks in advance & looking forward to hear from you.

Henry

1 ACCEPTED SOLUTION

enrjfitz1
8,939 Views

VOL COPY WITHIN THE SAME FILER

-----------------------------

1. Create destination volume of sufficient size "vol create *name* *aggregate* *size" eg 'vol create testvol aggr0 50g'

2. Restrict the source volume by taking it offline 'vol offline *volname*'

3. Copy the contents 'vol copy start *src_vol* *dest_vol*'

-- after copy online the source vol --

vol online *vol name*

View solution in original post

7 REPLIES 7

ekashpureff
8,939 Views

Henry -

Please see the man pages for the 'ndmpcopy' command ?


I hope this response has been helpful to you.


At your service,


Eugene E. Kashpureff
eugene.kashpureff@acsacs.com
Senior Systems Architect / NetApp Certified Instructor
http://www.linkedin.com/in/eugenekashpureff

HENRYPAN2
8,939 Views

Thanks Eugene for your quick response.

Would you please also advice the pro/cons between ndmpcopy and volume copy?

Cheers

Henry

ekashpureff
8,939 Views

Henry -

Vol copy is block for block, and probably faster.

ndmpcopy can do incrementals, which may be of help.

Most times I ask customers to do data migration using snapmirror local - even on a demo license key.

( Your sales rep can get you keys ...)


I hope this response has been helpful to you.


At your service,


Eugene E. Kashpureff
eugene.kashpureff@acsacs.com
Senior Systems Architect / NetApp Certified Instructor
http://www.linkedin.com/in/eugenekashpureff

scottgelb
8,939 Views

If 8.0 and San you can vol move too.  Or motor, vol copy and ndmpcopy like Eugene mentioned.

enrjfitz1
8,940 Views

VOL COPY WITHIN THE SAME FILER

-----------------------------

1. Create destination volume of sufficient size "vol create *name* *aggregate* *size" eg 'vol create testvol aggr0 50g'

2. Restrict the source volume by taking it offline 'vol offline *volname*'

3. Copy the contents 'vol copy start *src_vol* *dest_vol*'

-- after copy online the source vol --

vol online *vol name*

HENRYPAN2
8,939 Views

Salutes to Jason for the correct answer :>)

Henry

enrjfitz1
8,939 Views

You're very welcome

Public