How can delete aggregate or clear aggregate config

[JOEY_STORAGE]

Hi all!

     I use the FAS3220 in cluster mode.

     Two disk is failed, and the aggregate is failed.

     Now I can't delete the aggregate and delete the LUN/Volume.In the Vserver, I can't find the volume/LUN on OnCommand interface. But in the CLI, I can find the record for Volume.

     Need help urgency.

[GLENYU5820]

Hi Liu,

If you configured the raid-dp, 2 disk failed should not be a problem.

Need  details to get you out of the hole, If you have more than one aggregate, you can move the volumes to different one, and make sure nothing left at this aggregate, then try to delete it again.

If you have the support contract, suggest you to work with them via webex.

Thanks

Glen

[JOEY_STORAGE]

Hi!

   I use the aggregate with RAID 4, and two disk is fault.

   The aggregate is faulted. On interface, I can't find LUN/Volumn in vserver config, so I can't delete anything for my aggregate.

   Can your help me?

   Thanks!

[GLENYU5820]

Hi Liu,

Did the 2 failed disks replaced?

Run a few cli for me to get to know what you have.

    aggr status

    version

   system health status show

Thanks

Glen