Pardon me for my knowledge about NetApp & ONTAP. I am quite new and trying to understand the processor that is available on my ONTAP node. I logged into CLI and tried system controller config show and the Controller Module output says:
- Controller Module
2.5 GHz (Virtual Machine)
Model Name: CDvM200
Serial Number: 2XXXX1
Loader version: 1.0
Processor ID: 0x50654
Microcode Version: 0x2006b06
Memory Size: 31956 MB
I can see it is a 2.5GHz CPU, not sure if it has 8 processors or 8 cores. What processor is 0x50654? Is there some way I can know the specific CPU model? E.g. Intel 6226R or something.
This system is clearly a Virtual Machine. you would need to identify the instance type for the CVO to determine what it is allotted. for underlying hardware information, I am not certain if your cloud provider may be able to define that for you.
Thank you for following up. Unfortunately, I haven't got access to an on-prem system yet. I do have access to an on-prem 7-mode box. But looks like the commands vary, can't run "system controller config show" on the 7-mode box.
I did see your response saying "Processor type: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz". I don't see Processor type, instead, I see Processor ID on Cloud ONTAP. Will the output be Processor type when running on an on-prem box?
FAS2020> sysconfig -a NetApp Release 7.3.7P1: Tue Sep 18 04:20:57 PDT 2012 System ID: 0xxxxxxxx39 (FAS2020) System Serial Number: 2000000xxxxxx (FAS2020) System Rev: E3 System Storage Configuration: Single Path System ACP Connectivity: NA slot 0: System Board 2198 MHz (System Board XIV G1) Model Name: FAS2020 Part Number: 110-000xx Revision: G1 Serial Number: xxxxxx1 BIOS version: 3.0 Processors: 1 Processor ID: 0xf29 Microcode Version: 0x2f Memory Size: 1024 MB NVMEM Size: 128 MB of Main Memory Used CMOS RAM Status: OK Controller: B