ONTAP Discussions

Issue with downloading image file to node

MARK_SAUNDERS
21,176 Views

We have  a fresh built 4 node cluster with just aggr0 and vol0 nothing else has yet been done with it. I have been asked to upgrade it to 8.3 to allow for some testing. The 3rd party guys have left me the upgrade details but I am having some issues getting the image file onto the nodes.

 

Using the command as follows to update the image on node 02

 

system node image update -node ##########01-02 -package tftp://###.###.###.###/Netapp/83RC2_q_image.tgz -replace-package true

 

This connects and the tftp download progress can be seen when this reaches completion (On the tftp server the transfer shows as successful) the install fails

 

Install Failed.
Failed to download package from tftp://###.###.###.###/Netapp/83RC2_q_image.tgz.
Error: tftp download failed :  Verbose mode on.. Verbose mode on.. Verbose mode
on.. mode set to octet. mode set to octet. mode set to octet. getting from
###.###.###.###:Netapp/83RC2_q_image.tgz to
/mroot/etc/software/83RC2_q_image.tgz.downloading [octet]. getting from
###.###.###.###:Netapp/83RC2_q_image.tgz to
/mroot/etc/software/83RC2_q_image.tgz.downloading [octet]. getting from
###.###.###.###:Netapp/83RC2_q_image.tgz to
/mroot/etc/software/83RC2_q_image.tgz.downloading [octet]. Received 482569420
bytes in 666.2 seconds [5794889 bits/sec]. Received 482569420 bytes in 666.2
seconds [5794889 bits/sec]. Received 482569420 bytes in 666.2 seconds [5794889
bits/sec]. . . .
Error: command failed: Install Failed. Failed to download package from tftp://###.###.###.###/Netapp/83RC2_q_image.tgz. Error: tftp download failed :
       Verbose mode on.. Verbose mode on.. Verbose mode on.. mode set to octet. mode set to octet. mode set to octet. getting from
       ###.###.###.###:Netapp/83RC2_q_image.tgz to /mroot/etc/software/83RC2_q_image.tgz.downloading [octet]. getting from
       ###.###.###.###:Netapp/83RC2_q_image.tgz to /mroot/etc/software/83RC2_q_image.tgz.downloading [octet]. getting from
       ###.###.###.###:Netapp/83RC2_q_image.tgz to /mroot/etc/software/83RC2_q_image.tgz.downloading [octet]. Received 482569420 bytes in 666.2 seconds
       [5794889 bits/sec]. Received 482569420 bytes in 666.2 seconds [5794889 bits/sec]. Received 482569420 bytes in 666.2 seconds [5794889 bits/sec].

 

 

The bytes transfered 482569420 is the file size of the original image file, this has been redownloaded hash checked etc so I am now a bit stuck with what to try next.

 

Are there any logs for this that might shed some light onto why the transfer fails ?

7 REPLIES 7

shatfield
21,028 Views

See if you have the package locally:

system node image package show -node *

 

If you do, run update from the local package.

system node image update -node * -package 83RC2_q_image.tgz -set-default true

 

If not, try not specifying the -replace-package parameter

 

 

 

MARK_SAUNDERS
21,026 Views

system node image package show -node * is showing the packages with a .downloading extension

 

             Package
Node         Repository     Package File Name
------------ -------------- -----------------
###########01-01
             mroot
                            83RC2_q_image.tgz.downloading
###########01-02
             mroot
                            83RC2_q_image.tgc.downloading
###########01-03
             mroot
                            83RC2_q_image.tgz.downloading
3 entries were displayed.

shatfield
20,991 Views

It may just not like your tftp server.  Try pulling it from an http server.

 

If that doesn't work, md5 the copy on the filer to see if its intact. 

 

set diag

systemshell * md5 /mroot/etc/software/83RC2_q_image.tgz.downloading

set admin

 

 

 

prashant91
4,415 Views

Do we have the command to pull it from the http server. "system node image get" command is not recognized in 9.7P8.

AlexDawson
4,394 Views

This thread is from 7 years ago - please review this document for the correct commands for current ONTAP - https://docs.netapp.com/us-en/ontap/upgrade/task_download_and_install_ontap_software_image.html#for-automatic-nondisruptive-upgrade-andu

PHILMEAGHER
20,045 Views

Mark did you ever get this working via TFTP as I'm getting the same issue with uploading 8.3

 

Thanks

prcpa8w3p
15,858 Views

I got SP's to successfully upgrade using the following command:

 

system service-processor image update -node <node_name> -update-type network-full -package 306-03929_A0_FAS9000_AFF-A700_4.1P2_SP_FW.zip -clear-logs true

 

Ensure that the above package is valid when you run a system node image show -node <node_name>

Public