Community maintenance is complete. Thank you for your patience!

ONTAP Discussions

MirrorVault from AFF to FAS fails on Snaplock Aggr

Greg_Wilson

anyone successfully setup a mirror vault from one cluster to secondary with the aggregate on the secondary being snap locked ?

 

The documentation seems to imply this can be done.

 

im getting failed to  initialize issues

 

cls02::> snapmirror show -destination-path svm_repl:greg_test_02_dr

 

                            Source Path: htc:greg_test_02

                       Destination Path: svm_repl:greg_test_02_dr

                      Relationship Type: XDP

                Relationship Group Type: none

                    SnapMirror Schedule: -

                 SnapMirror Policy Type: mirror-vault

                      SnapMirror Policy: MirrorAndVault

                            Tries Limit: -

                      Throttle (KB/sec): unlimited

                           Mirror State: Uninitialized

                    Relationship Status: Idle

                File Restore File Count: -

                 File Restore File List: -

                      Transfer Snapshot: -

                      Snapshot Progress: -

                         Total Progress: -

              Network Compression Ratio: -

                    Snapshot Checkpoint: -

                        Newest Snapshot: -

              Newest Snapshot Timestamp: -

                      Exported Snapshot: -

            Exported Snapshot Timestamp: -

                                Healthy: false

                       Unhealthy Reason: Transfer failed.

                Destination Volume Node: cls02-01

                        Relationship ID: d142a18e-e9ba-11eb-9709-d039ea319cff

                   Current Operation ID: -

                          Transfer Type: -

                         Transfer Error: -

                       Current Throttle: -

              Current Transfer Priority: -

                     Last Transfer Type: initialize

                    Last Transfer Error: Policy is not of type "vault" for SnapMirror relationship of type "XDP" on SnapLock destination volume "svm_repl:greg_test_02_dr".

                     Last Transfer Size: -

Last Transfer Network Compression Ratio: -

                 Last Transfer Duration: -

                     Last Transfer From: svm:greg_test_02

            Last Transfer End Timestamp: 07/21 10:34:32

                  Progress Last Updated: -

                Relationship Capability: 8.2 and above

                               Lag Time: -

           Identity Preserve Vserver DR: -

                 Volume MSIDs Preserved: -

                 Is Auto Expand Enabled: -

           Number of Successful Updates: 0

               Number of Failed Updates: 0

           Number of Successful Resyncs: 0

               Number of Failed Resyncs: 0

            Number of Successful Breaks: 0

                Number of Failed Breaks: 0

                   Total Transfer Bytes: 0

         Total Transfer Time in Seconds: 0

 

<snip>

 

1 ACCEPTED SOLUTION

Sergey_Osipov

https://www.netapp.com/pdf.html?item=/media/6158-tr4526pdf.pdf

p.17 

ONTAP allows backing up a flexible volume other than a SnapLock volume to an SLE or an SLC volume.
That is, a SnapVault relationship can be created between a FlexVol volume as source and SnapLock
volume as destination.

 

same here

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Protection_and_Security/SnapLock/Is_SnapMirror_from_non-SnapLock_to_SnapLock_volume_supported%3F

 

an ONTAP-controlled SnapMirror with the SnapMirror Policy Type Vault is supported between a non-SnapLock volume and a SnapLock volume.

View solution in original post

1 REPLY 1

Sergey_Osipov

https://www.netapp.com/pdf.html?item=/media/6158-tr4526pdf.pdf

p.17 

ONTAP allows backing up a flexible volume other than a SnapLock volume to an SLE or an SLC volume.
That is, a SnapVault relationship can be created between a FlexVol volume as source and SnapLock
volume as destination.

 

same here

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Protection_and_Security/SnapLock/Is_SnapMirror_from_non-SnapLock_to_SnapLock_volume_supported%3F

 

an ONTAP-controlled SnapMirror with the SnapMirror Policy Type Vault is supported between a non-SnapLock volume and a SnapLock volume.

View solution in original post

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public