ONTAP Discussions

Ontap 9.11.1 SIMULATOR: SVM migrate fails to bring the SVM back to the original Cluster

JSerra
284 Views

Hi. 

After a successful migration from cluster netapp to cluster netapp_dr , we tried to migrate the svm back to the original node.

 

Command used:

 

vserver migrate start -vserver svm0_site1_nfs_2 -source-cluster netapp-dr

 

Several attempts made and even tried to rename de SVM. Always fails the same way: Reason: Configuration replication service is not active.

 

vserver migrate show -instance
Vserver: svm0_site1_nfs_2
vserver-uuid: ab4652e0-7cd0-11ed-a97f-000c29ed6725
Destination Cluster: netapp
Source Cluster: netapp-dr
Migrate Vserver Type: migrate-destination
Status: setup-configuration-failed
Automatic cutover: true
Start Time: 12/16/2022 10:05:21
End Time: 12/16/2022 10:11:09
Last Pause Time: -
Last Resume Time: -
Last Rollback Time: -
Cutover Trigger Time: -
Cutover Start Time: -
Cutover Completion Time: -
Rollback Count: -
Status Details: Migrate operation failed. Reason: Application of configuration failed for Vserver "svm0_site1_nfs_2". Reason: Failed when polling for the migrate operation completion for Vserver "svm0_site1_nfs_2". Reason: Config replication service error on cluster "local". Reason: Configuration replication service is not active. To resume the Vserver migrate from where it left off use the "vserver migrate resume" command. To try the Vserver migrate again from the beginning, you must first abort the Vserver migrate operation using "vserver migrate abort" command and then start the Vserver migrate operation again using the "vserver migrate start" command.
IpSpace: Default
Aggregate List: -
Owning Node: netapp-01
Skip Performance Check: true
Stream UUID: 2724e6e5-7d29-11ed-a97f-000c29ed6725
Is Past Point Of No Return: -
Last Failed Migrate Status: setup-configuration
Current Migrate Operation: none
Last Migrate Operation: start
Client outage window during cutover: -
Migrate UUID: 2724e6f3-7d29-11ed-a97f-000c29ed6725
Migrate Failure: -
Automatic Source Cleanup: true

 

Any ideas on how to fix this?

 

 

 

1 ACCEPTED SOLUTION

TMACMD
254 Views

Every node in the cluster must have a data aggregate

 the cluster replication service will create the MDV_CRS volumes, one per controller per cluster

View solution in original post

1 REPLY 1

TMACMD
255 Views

Every node in the cluster must have a data aggregate

 the cluster replication service will create the MDV_CRS volumes, one per controller per cluster

Public