ONTAP Discussions

There are not enough partitionable disks found on this node. ADP has been disabled.

waynewang
810 Views

Hi everyone,
First time posting here. On a second hand FAS2750(9.11P2)

Disk assignment fails after options 9a/9b, as following 


Loading cfiscsi module
Unable to determine local cluster UUID ('bootarg.mgwd.cluster_uuid')
Unable to determine local cluster UUID ('bootarg.vm.mgwd.cluster_uuid')
Unable to generate /var/etc/iscsi.conf, status: 1
Unable to determine local cluster UUID ('bootarg.mgwd.cluster_uuid')
Unable to determine local cluster UUID ('bootarg.vm.mgwd.cluster_uuid')
Unable to generate /var/etc/ctl.conf, status: 1
rlib_rport_alloc: enabling unsafe global rkey
rlib_rport_alloc: enabling unsafe global rkey
FWU 1st trigger point
FWU has no post firmware update action registered.
Feb 02 01:54:31 Power outage protection flash de-staging: 41 cycles
Pensando Offload Driver, ver 1.4.0-E-78
Pensando Ethernet NIC Driver, ver: 1.4.0-E-78
ionic_rdma ver 1.4.0-E-78 : Pensando RoCE HCA driver

Loaded OSAL module ***OS2SP configured successfully***Feb 02 01:55:09 [localhost:cf.ic.sbb:notice]: HA interconnect: SBB Compatibility Event. Compatde found. The interconnect device has been enabled.
Feb 02 01:55:22 [localhost:discover.6500.unsupported:notice]: FC-to-SAS bridge ATTO 6500N discovery is disabled.
Feb 02 01:55:22 [localhost:fal_nvme.partition.status:notice]: Partition 0-1 with capacity 894 GiB status: rewarm.
pnso provider init started.
Notice : pnso card not detected.
hwo: Node is using hardware provider : 1.
cryptomod_fips: Executing Crypto FIPS Self Tests.
cryptomod_fips: Crypto FIPS self-test: 'CPU COMPATIBILITY' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 ECB, AES-256 ECB' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 CBC, AES-256 CBC' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 GCM, AES-256 GCM' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 CCM' passed.
cryptomod_fips: Crypto FIPS self-test: 'CTR_DRBG' passed.
cryptomod_fips: Crypto FIPS self-test: 'KDF' passed.
cryptomod_fips: Crypto FIPS self-test: 'SHA1, SHA256, SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'HMAC-SHA1, HMAC-SHA256, HMAC-SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'PBKDF2' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-XTS 128, AES-XTS 256' passed.
cryptomod_fips: Crypto FIPS self-test: 'Self-integrity' passed.
9b
AdpInit: There are not enough partitionable disks found on this node. ADP has been disabled.
Rebooting to clear all env variables due to a 9b failure..Terminated
.
Uptime: 2m9s
System rebooting...
BIOS Version: 11.20
Portions Copyright (C) 2014-2023 NetApp, Inc. All Rights Reserved.

Initializing System Memory ...
Loading Device Drivers ...
Configuring Devices ...

 

 

Could you please help?
Many thanks

1 REPLY 1

TMACMD
743 Views

Second hand? Off you’re at this point you better have either the license codes or the Netapp license files for those controllers. Otherwise you won’t get very far. 

Sounds like you are trying to re-init the system?

 

 Either you are trying to re-unit or the prior owner did a “set-defaults” before selling it. 

please provide more details

 

 

Public