ONTAP Discussions

add image failed in on command manager for ONNTAP upgrade

Failed to add the software image to the cluster. Verify if the image and the specified URL are valid and ensure that there is sufficient space in the system management storage area.
what is the reason for this issue???

 

 

 

cl01.PNGc

10 REPLIES 10

Re: add image failed in on command manager for ONNTAP upgrade

I'm having the same issue, and still it persists even after getting rid of the old images that were in there.

 

I can't seem to find where the 'system management storage area' is in doco

Re: add image failed in on command manager for ONNTAP upgrade

Wow I feel stupid- so went to the command line and tried it thusly: get -url http://iisserver.corp.com/91_q_image.tgz

 

Got error msg: Error: command failed: Failed to download package from
       http://.../91_q_image.tgz. Error: Couldn't resolve host name : Couldn't
       resolve host 'iisserver.corp.com'

 

Tried with the IP and of course it worked as expected.

Re: add image failed in on command manager for ONNTAP upgrade

It is /mroot/etc/software in each of the nodes. On Clustered ontap, this is difficult to access directly, so pulling the image on with HTTP is suggested.

 

If the GUI fails, try the command line. Instructions for installing software images are at http://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-cmpr-910/TOC__system__node__image.html

Re: add image failed in on command manager for ONNTAP upgrade

Thanks Alex.

 

But i am looking to GUI based process where i can fixed this rather  than going CLI..

 

So will FTP server will work like -fttp://username@password:XXXXX/DATAONTAP\8_3_2_g.tgz file .

 

 

Anyone who has tried and stuck 

Re: add image failed in on command manager for ONNTAP upgrade

Please make sure the imgae file is copied to the directory C:\inetpub\wwwroot\ for http and C:\inetpub\ftproot for ftp

 

http://server_ip/image.tgz (C:\inetpub\wwwroot\image.tgz)

 

Re: add image failed in on command manager for ONNTAP upgrade

The correct FTP syntax is as follow once your FTP server is up and running. Not sure why the adding image fails due to lack of space on FAS8200

 

ftp://anonymous:password@10.10.10.10/92_q_image.tgz

Re: add image failed in on command manager for ONNTAP upgrade

Thanks a lot... i was connected with a VPN, my HTTP server was running with the VPN adress and not my local address.

Re: add image failed in on command manager for ONNTAP upgrade


@amerchant wrote:

The correct FTP syntax is as follow once your FTP server is up and running. Not sure why the adding image fails due to lack of space on FAS8200

 

ftp://anonymous:password@10.10.10.10/92_q_image.tgz


Yes this is what I was looking for, the correct FTP syntax, kept throwing an error about how authorization was required, even though i set my FTP site to anon auth. Thank you!

Re: add image failed in on command manager for ONNTAP upgrade

Reason: Data ONTAP API Failed: Data retrieval failed from remote host "http://iis/94_q_nodar_image.tgz". Reason: Timeout was reached : Connection timed out after 60000 milliseconds

Click Retry to start the add operation.

Re: add image failed in on command manager for ONNTAP upgrade

HI,

I have tried and failed, below is the error, i have upgaded before and it was successfull. but this time it is failed, My ftp sever works fine as i have tested it.

 

Netapp_clus::> system image get -node netappclusA -package ftp://10.171.146.68/93P10_q_image.tgz

Enter username for remote host "10.171.146.68": v-sarosa

Enter password for remote host "10.171.146.68":

Software get ftp://.../93P10_q_image.tgz started on node netappclusA
Downloading package. This may take up to 10 minutes.
100% downloaded
Install Failed.
Failed to download package from ftp://.../93P10_q_image.tgz. Error: Timeout was
reached : FTP response timeout
Error: command failed: Install Failed. Failed to download package from ftp://.../93P10_q_image.tgz. Error: Timeout was reached : FTP response timeout

 

In GUI alos i have tried but getting the error as well

 

Please anyone help on this, Help is much appreciated!!!

Cloud Volumes ONTAP
Review Banner
All Community Forums
Public