We realized that we are not able to connect to one of the the 2 Controllers with a Windows Client on a FAS2240-2 / NetApp Release 8.2.5P3 7-Mode . Checking the connection via port 445 showed that 445 on controller one is not open, even if the CIFS configuration was performed with success. Is there a way to check open Ports and also a way to open them if needed ?
... View more
We have vscan servers in production for multiple SVMs. 1. how can we find out the statistics of VSCAN such as how many scans completed, how many virus detected and cleaned, how many scan processes queued? 2. how can we find out if vscan servers too busy and more servers need to be added? 3. if any VSCAN servers or connections issues, will we get alerts or notitcations? 4. is there any VSCAN information integrated with active IQ? 5. happened a few times already, we had cifs share access issues, had to stop vscan services to regain the access. we plan to set -vscan-fileop to writes-only, and add excluvise list, are they good ideas? 6. what is the regular vscan daily monitoring? thanks advance.
... View more
The old 7-mode versions of Ops Manager and System Manager require Adobe Flash, which will cease working on Google Chrome on 12/31/2020. While I know 7-mode is on the way out, there are still a few 7-mode systems out there (we have three 2220's left running 7-mode). Are there any considerations being given to update or change these applications to not require Adobe Flash?
... View more
"HA Group Notification from node1 (SNAPMIRROR SYNCHORONOUS EXCEPTION: Splitter critical threshold breached [OWM]) NOTICE" alert we received recently. However, we don't find any error on the snapmirror sync. All synced normally. I tried to find more information about how this Splitter work in snapmirror. but seems fewer information for public. I can only found "The splitter sends the I/O to both primary and secondary storage systems over the interconnect replication network." on the site. My question is 1. How does the splitter work in snapmirror? 2. In what circumstances that splitter threshold will be breached? 3. What is the splitter threshold? where I can print the policy out? Seems it can be turn on/off only? 4. How to troubleshoot if we encounter such error for splitter?
... View more
Hi Folks, Is there any specific user guide to configure NDMP with veritas netbackup 8.3. I have already gone through all sort of documentation on netapp. Can some one answer my below questions. We have AFF400 for which i have LACP 2 ports (e0f/e0h as a0b) which are of 10Gb each and created separate broadcast domain. Does LACP works on the NDMP backup with veritas? 1. I have currently tapes drives configured with Hitachi NAS now, can we use the same tape drives to configure NDMP on netapp. Will there be any issues or errors with current tape drives which is working fine on HNAS? If so how exactly the zoning should be done ( Tape Drives and Netapp ports zoning since i use LACP can i add both the ports on each node and make one zone per node). Is this the correct way ? 2. Is it mandatory to create intercluster LIF's? 3. LIF assigned should be in the same IP range as the backup network? 4. Any requirement that we should use Accelerator for NDMP from Netbackup ? PS:-- For NetApp filers, Accelerator for NDMP supports only the DUMP format. Consult your NetApp documentation for specific details about its DUMP format. prod prod-01_mgmt1 up/up 10.10.50.100/24 prod-01 e0M true prod-02_mgmt1 up/up 10.10.50.102/24 prod-02 e0M true cluster_mgmt up/up 10.10.50.103/24 prod-01 e0M true vserver1 datalif10 up/up 10.10.100.20/24 prod-01 a0a true vserver2 datalif20 up/up 10.5.197.61/24 prod-02 a0a true Appreciate your help.
... View more
