The SMBC I Create is use normally, bus I found a warring in Unified Manager the wwn of the vmfs datastore on vcenter corresponds to multiple ONTAP LUN with identical serialID. This configuration is not supported for: umvolsmbc umvolsmbc is the datastore's name Is that message is normal ?
... View more
Hello, ActiveIQ display that is a good recommandation for security to enable OCSP for certificates. For the moment, on my cluster i only use auto signed certificates. If i enable this, i have to be carefull for something or no problems to enable ? thanks a lot
... View more
We are considering going from OnTap 9.3 directly to 9.7 in a single upgrade. We have a AFF300, FAS2650 and FAS2620 systems. Has anyone gone this route and how did it go. I have never done multiple versions is a single upgrade.
... View more
We recently placed in production a FAS 8300 (9.14.1P6). We had a FAS2650 for seven years. We built a Windows 2019 with ActiveIQ Unified Manager 9.14. When we first tried to add the ONTAP to the Unified Manager, it told us the self signed cert has already been expired. We followed the instructions below https://kb.netapp.com/on-prem/ontap/DM/System_Manager/SM-KBs/How_to_renew_an_ONTAP_selfsigned_certificate_via_System_Manager Under the client/server certificates tab, we renewed the self signed cert for the expired SVM self signed cert in which we got a new self signed cert with a new name. Then we deleted the original self signed cert (SVM). Then we did the same and renewed the cert for the cluster but we didn't remove the expired self signed cert (cluster). We went through the process again to add the ONTAP cluster but it would just hang forever with the spinning circle. We have a few questions as a result of this process. 1) The renewal of the certs does not affect users access on CIFS shares? 2) How do we fix the issue described above (trying to add ONTAP onto ActiveIQ Unified Manager). SVHO
... View more
Hello and sorry for my english, My cluster is synchronyze with NTP servers. If i do "cluster date show" i can see that the synchronization is good and the command "cluster date show" say that the time is good. But when i want to initialize SnapLock compliance clock for snapshot lock, the system display me time with 10 minutes late. So, it is normal ? i can initialize or not ? thanks a lot
... View more