I am decommissioning two nodes in a four node NetApp cluster. The cluster is a SnapMirror destination and source. I edited the cluster peer relationships on each peer cluster and removed the IP's for the nodes being decommissioned. I then disabled and deleted the two intercluster LIFs for the two nodes being decommissioned. For good measure, I removed the intercluster ports on these two nodes from the broadcast domain Replication is still working, but for some reason the System Manager GUI shows "Availability" as "Partial" for each peer cluster. Similarly, at the command prompt, when I enter "cluster peer health show", there are still entries for the two nodes that are being decommissioned. Any ideas on how to clean up the cluster database and tell it to get rid of these IP's fully?
... View more
Hello: I have a MirrorAndVault snapmirror policy, with the defaults set to keep 7 daily and 52 weekly snapshots. However, the destination volume only has the snapmirror created snapshots, despite the fact that dakly and weekly snapshots exist at the source volume. I have the feeling that this is something stupid in the setup, but for the life of me I can't see it. Can anyone explain this? This is 9.5P6 (both sides). Thanks... Bill ====DESTINATION==== DESTnas10::> snapmirror show -destination-path DESTnas10_fs_dr:DataSrc1 -fields policy,policy-type,state,status,lag-time source-path destination-path policy-type policy state status lag-time ---------------------- ----------------------- ------------ -------------- ------------ ------ -------- SRCnas01_svm1:DataSrc1 DESTnas10_fs_dr:DataSrc1 mirror-vault MirrorAndVault Snapmirrored Idle 11:4:27 DESTnas10::> snap list DataSrc1 ---Blocks--- Vserver Volume Snapshot Size Total% Used% -------- -------- ------------------------------------- -------- ------ ----- DESTnas10_fs_dr DataSrc1 snapmirror.df26909a-f73a-11e9-b460-00a09868e81b_2150399487.2021-01-13_151500 2.83GB 0% 0% snapmirror.df26909a-f73a-11e9-b460-00a09868e81b_2150399487.2021-01-14_031500 340KB 0% 0% DESTnas10::> snapmirror policy show -policy MirrorAndVault Vserver Policy Policy Number Transfer Name Name Type Of Rules Tries Priority Comment ------- ------------------ ------ -------- ----- -------- ---------- DESTnas10 MirrorAndVault mirror-vault 3 8 normal A unified Asynchronous SnapMirror and SnapVault policy for mirroring the latest active file system and daily and weekly Snapshot copies. SnapMirror Label: sm_created Keep: 1 daily 7 weekly 52 Total Keep: 60 ====SOURCE===== SRCnas01::> snap list DataSrc1 ---Blocks--- Vserver Volume Snapshot Size Total% Used% -------- -------- ------------------------------------- -------- ------ ----- SRCnas01_svm1 DataSrc1 weekly.2020-12-20_0015 1.33GB 0% 0% weekly.2020-12-27_0015 1.53GB 0% 0% weekly.2021-01-03_0015 1.93GB 0% 0% daily.2021-01-08_0010 7.81GB 0% 0% daily.2021-01-09_0010 6.12GB 0% 0% daily.2021-01-10_0010 12.82MB 0% 0% weekly.2021-01-10_0015 266.3MB 0% 0% daily.2021-01-11_0010 542.4MB 0% 0% daily.2021-01-12_0010 5.59GB 0% 0% daily.2021-01-13_0010 6.29GB 0% 0% daily.2021-01-14_0010 3.25GB 0% 0% snapmirror.df26909a-f73a-11e9-b460-00a09868e81b_2150399487.2021-01-14_031500 5.52GB 0% 0% hourly.2021-01-14_0905 11.44MB 0% 0% hourly.2021-01-14_1005 12.10MB 0% 0% hourly.2021-01-14_1105 16.43MB 0% 0% hourly.2021-01-14_1205 9.89MB 0% 0% hourly.2021-01-14_1305 12.32MB 0% 0% hourly.2021-01-14_1405 6.39MB 0% 0%
... View more
Hi Gurus, I'm operating and managing ONTAP 9.7 storages and executes some CLI commands in maintenance works. When CLI command outputs multiple lines, ONTAP interrupts the output and asks and show below, Press <space> to page down, <return> for next line, or 'q' to quit... Are there any methods or options to have all output without interrupting? Because to check the storage health and status in normal operations, I should execute more than 15 CLI commands i n a row and have the outputs without hitting enter key. kind regards
... View more
Hi, We currently have a CDOT FAS2750A storage with a DS212C tray. We also have a 7Mode FAS 2040A storage that has a DS4246 tray connected and the storage is turned off, I don't know if it has an aggregate or several created. What I would like is to be able to use the DS4246 tray in the FAS2750A storage, I currently have the IOM12 so I can add them to the DS4246 and cables. What I don't know is what steps I have to take and how. Do I have to format the DS4246 tray and for this I have to turn on the cabin 7 mode FAS2240A? Can I add the IOM12 modules to the DS4246 tray and then wire to the end of the other DS212C tray, and then give disk? I'm a bit lost, in what steps should I perform and what commands to use. Thanks,
... View more