Hello , I'd like to share the same vlan in multiple SVMs for AV setup ( create additional LIF in each Vlan ) Actually ALL SMVs are in the same domain , but each SVM as their proper VLAN ,ipspace and broadcast-domain for data traffic .
... View more
Good day community, unfortunately we had the decision to install firmware version 9.15.1P6 instead of 9.13.1P13 on a new storage we have, basically the goal right now is to find a way to downgrade the firmware version to 9.13.1P13, this storage only has the basic configuration right now, which means there is no data on this storage now. My question, is there any way to downgrade the firmware version from 9.15.1P6 to 9.13.1P13?
... View more
Hi All, Refer "Once root volume encryption begins, it must complete. You cannot pause the operation. Once encryption is complete, you cannot assign a new key to the root volume and you cannot perform a secure-purge operation''. is only root volume cannot secure-purge operation or all volume in cluster cannot secure-purge operation? Best regards
... View more
We are currently setting up an iSCSI SVM on the DG5000 QLC Storage and encountered a problem in System Manager. It states that controller node2 has no logged-in initiators. However, upon checking the servers (ESXi) and the storage cluster, we noticed that the active iSCSI sessions are indeed present on both controller nodes. Additionally, we performed an ONTAP upgrade from v9.15.1P2 to v9.16.0, but this did not resolve the issue. We observed that the virtual machine running on the Lenovo Storage Datastore continued to operate smoothly even after we shut down the iSCSI interfaces on Controller Node1. Further testing showed that keeping only one port active from each controller for all ports that are part of the iSCSI port set yielded good results, confirming that multipath functionality is intact. Not sure, how to fix the errors seen in the GUI. Attaching the screenshots
... View more
