Hello all, My user have a FAS2554 (Data ontap 8.2.5P5), after a reboot , intut "license show "command ,hint "License database is not available at this time". according to KB, reboot FAS2554,The problem still exists. it can be used normally, but the backup software prompt does not have permission. Can who help me .
... View more
Hi All, I have run into snapmirror transfer errors due to the destination is being full. However the destination volume is not full, rather one of the two constituents is: > volume show -is-constituent true Vserver Volume Aggregate State Type Size Available Used% --------- ------------ ------------ ---------- ---- ---------- ---------- ----- <--snip--> aggr_01_2 online DP 100TB 16KB 99% aggr_01_1 online DP 60TB 20.59TB 65% When I increased the size of the Volume ontap added the additional space to the constituent that was not full while leaving the constituent that was full in the full state. volume modify -vserver name -volume My_1_vault -size +20TB <---snip---> aggr_01_2 online DP 100TB 16KB 99% <<< NO increase aggr_01_1 online DP 100.00TB 60.59TB 39% <<< 40TB increase Is there any way to increase one specific constituent? I was thinking that I could add a third constituent but it would still leave the full constituent full. Thank you for any ideas to solve this! Bela
... View more
Thu Jan 21 01:20:06 CET 2021 ScheduledUpdate[Jan 21 01:05:00]:<ID> Operation-Uuid=<ID> Group=none Operation-Cookie=0 action=Defer source=Cluster1:vol_source destination=Cluster2:vol_dest status=Failure message=Transfer failed.(Replication operation request failed from Cluster Id: <ID>, Node Id: <ID> to Cluster Id: <ID>, Node Id: <ID> due to a network error(CSM: Operation referred to a non-existent session.))
... View more
Hi, I'm preparing to upgrade my cluster this weekend and am looking to upgrade to the latest release. According to the Upgrade Advisor 9.16.1P1 is the latest release. The downloads section only has 9.16.1 available. Is the 9.16.1P1 release going to be imminently available? Thanks, Ben
... View more
Hi,
I am sure changing Cluster & Node Name should be non-disruptive , but can someone who has done it or NetApp confirm the same ?
As far as SnapMirror is concenred, it happens via SVM, which which are not renaming at all.
We just want to change the Cluster Name & Node Name.
I am guessing, I will have to re-add the Cluster to : OCUM, as it was added via Hostname.
Thanks,
Ash
... View more
