Hi,    So I am having issues being able to configure, save and connect to whatever I set my e0a IP address to. The ip i am using is free on my network,  and I am able to ping it after setting it, but unable to connect via web or via Putty.    Then, as soon as I reboot - all the config disappears. I assume there is a save command in Maintenance mode?    Is it something really simple I am missing here?    TIA for support. ... View more

Hi All, I am about to upgrade two of our NetApp clusters to ONTAP 9.16 P1 and I was wondering if the FW patch/fix NA02 or NA03 is included for: https://kb.netapp.com/Support_Bulletins/Customer_Bulletins/SU574 X387A X387_WPSCE16TA07​  16TB NA02 I found the release notes but it does not have the list of bug fixes and details in it, the enhancements only. If it is not included could you point me to doc or KB article that outlines the FW update? Thank you very much! Bela     ... View more

Hi All,   Is there a way to delete unwanted iscsi initiators. If you go to System Manager > Storage VMs > Select an svm with iscsi protocol enabled > iSCSI > Initiator Security   I have a list of initiators (VMs) that have all been decommed and can be removed from this list. If I select one of them there is no way to just "delete" that initiator through System Manager. I've also had a look at doing it via command line but again cant seem to spot the command to do it.   The only way I have managed to delete them is if they were already in an igroup I can remove them from the igroup which also deleted them from Initiator Security. If they arent in an igroup then I cant find a way at the moment to delete them.   ONTAP version is 9.11.1P10 Thanks ... View more

Hello, Disable Fpolicy suspend nfsv3 operations for around 30 seconds. statistics output screenshot in the attachment. Check two colums: create avg latency and create success When execure disable fpolicy command from cluster CLI create operations drop to 0 for around 30 seconds. Create avg latency 1300us 1250us 1290us 0us 0us 0us 0us 0us 0us 0us 0us 0us 0us 50298us 648us 748us Any help would be appreciated. Thanks! ... View more

We use OnTap 9.x and all users have personal shares. We have a use case to make some of these personal share's read-only. Aside from actually setting the read-only attribute on the folders/files therine is there any method to mark a personal share as read-only at the Ontap side? ... View more