Dear Community,   We would like to set up a separate role for our trainees on our cluster. This role should - Enable read-only access to the entire cluster - Complete access to a dedicated Test_SVM that is available for training purposes   It is often said, that this is not possible for a specific SVM, but there is even a KB article that can serve as a basis for this ("How to set up and configure RBAC in ONTAP to limit administrator access to specific volumes or SVMs" From <https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/How_to_set_up_and_configure_RBAC_in_ONTAP_to_limit_administrator_access_to_specific_volumes_or_SVMs#>)   The problem with this, however, is that when creating the role for ’-cmddirname DEFAULT -access readonly’ for the special Test_SVM “readonly” is not possible, but “none” is always suggested:   FASxxxxx::> security login role create role -role Restricted_Azubi_Role -cmddirname DEFAULT -access readonly -query ‘’ -vserver SVM_TESTxxxxx   Error: command failed: The only valid value for access is ‘none’ for a Vserver role when the specified command directory is ‘DEFAULT’   FAS27501::>   What am I doing wrong? Any ideas? Many thanks and best regards   Michael ... View more

Hello, I have to resize about 400 flexvols, having partially deleted old data. My target is to resize exactly to 97% of used space. Having done the job before on few volumes I used to resize it manually. Now I'm trying to autoresize volumes using volume options             space-nearly-full-threshold-percent             space-full-threshold-percent             autosize-grow-threshold-percent             autosize-shrink-threshold-percent but I can't get the volume autosized. Maybe I specified wrong values for the above options, can you help me on how to set them to achieve the 97% of used space? Thank you, Fabrizio ... View more

Hello everyone.   I ama new on netapp. On our netapp one disk have failed and took his place the spare disk. After almost 2 week the new disk has arrive and change the broken disk with the new one. On the web gui we show the alert one disk in unassign and so we assign the to the A node. At this time before the replace all the disks are shared so i believed the new disk will be assign as spare because all the disk before the replace was share. But no the new disk is not spared and is shared so know we have 12 shared disks and 0 spares. How i can make the new disk (bay 5) spare?     AFF-A220 NetApp Release 9.12.1P4 If u need more info drop a comment.   Thanks     PS: AFF-A220 NetApp Release 9.12.1P4 ... View more

Community    We had a glitch in the cluster network which took two S3 buckets offline for a minute. After that, we started to see some "Nblade.NfsRaidError" and "wafl.raid.incons.userdata" in the event logs. Our environment uses NFSv3 (no SAN).  I have seen the KBs about "How to clear Inconsistent User Data Block errors", however I am mostly looking to assess the impact and corrective measures.    Note: About the Nblade.NfsRaidError, I  have more than 200 + lines of logs       --------------- Errors --------------------   7/19/2024 20:25:23 sng-na-vpod-c800-01 DEBUG Nblade.NfsRaidError: A RAID error has been encountered while processing this NFS request on the volume with MSID 2147484755 and Vserver 8.   7/19/2024 20:25:23 sng-na-vpod-c800-01 ERROR wafl.raid.incons.userdata: WAFL inconsistent: inconsistent user data block at VBN 281474976710642 (vvbn:281474976710642 fbn:17167088 level:0) in public inode (fileid:68095 snapid:0 file_type:1 disk_flags:0x8002 error:121 raid_set:1) in volume volume_prod@vserver:123478563412. ... View more

Hi, has anyone tried enabling SSO for Unified Manger in Azure Idp what are the SAML assertions values and claim rules that needs to be configured. any idea? ... View more