Hello All, I think I have just been looking at this too long and it is an easy answer, but I have an aggregate that has 5954GB physical used and a volume in that aggregate that has 7903GB physical used. How is the physical volume larger than the aggregate? I have looked at all the efficiencies and they add up independently, I just can't make the math above work. If anyone can point me in the right direction to see how this is possible I would be very grateful. I can provide more output if needed. Thanks!
... View more
I need to update to later version of ONTAP and after looking at a few YouTube videos they all recommend using ActiveIQ to produce an update plan. When I log into ActiveIQ I don't see our organisation and when I try and add the serials from the nodes it says they're invalid. Last year the organisation I work for moved support from NetApp to a 3rd party support provider, is it possible to use ActiveIQ without a current support agreement with NetApp? Are there any other good resources to help me plan the upgrade if I can't use ActiveIQ, I want a good plan as I haven't carried out an upgrade before. Thanks.
... View more
I am trying to physically identify a node within a HA, are there any commands? I am not sure which one is which in the canbinet in Data Center. Thanks for your inputs!
... View more
Hello everyone, I have seen many articles in the forum about Fas2552 7-mode upgrade to c-mode. But many kilobytes seem to be inaccessible. It appears that Fas2552 cannot be upgraded directly from 7-MODE to C-mode. There seems to be only one way to reformat. Do you have the corresponding documents? And right now I have two FAS2552 Snapmirrors. I also need to consider the 7-mode and c-mode license issues
... View more
Hi Everyone..
Actually we have FAS2240 with Data Ontap 8.1.4P1 7-Mode and Filer-A had failed. So we have replaced with New one.
But unfortunately forgot to swap Flash Card from failed filer to new filer.
In result the New Filer is having Ontap 8.2P3 7-Mode has been configured that newer version then we have in out system.
So system is running but Takeover feature has been disabled due to ontap mismatch.
strga> cf status
strgb is up, takeover disabled because of reason (version mismatch)
strga has disabled takeover by strgb (version mismatch)
NVRAM TOC: Local 29 Partner 23
WAFL FSInfo: Local 23589 Partner 22331
WAFL log: Local 396 Partner 334
RAID: Local 12 Partner 11
RAID NVRAM: Local 42 Partner 33
VIA Interconnect is up (link up).
So now we have two options here, one need to upgrade Filer-B to 8.2P3 or downgrade Filer-A to 8.1.4P1.
But to perform both we need those Ontap Firmware. we have tried to search Netapp Support but unable to find any version blow 8.5
So I need help here if someone pls share link to download above version will be really helpful to me
Thank You
... View more
