Hi All, Refer "Once root volume encryption begins, it must complete. You cannot pause the operation. Once encryption is complete, you cannot assign a new key to the root volume and you cannot perform a secure-purge operation''. is only root volume cannot secure-purge operation or all volume in cluster cannot secure-purge operation? Best regards
... View more
We are currently setting up an iSCSI SVM on the DG5000 QLC Storage and encountered a problem in System Manager. It states that controller node2 has no logged-in initiators. However, upon checking the servers (ESXi) and the storage cluster, we noticed that the active iSCSI sessions are indeed present on both controller nodes. Additionally, we performed an ONTAP upgrade from v9.15.1P2 to v9.16.0, but this did not resolve the issue. We observed that the virtual machine running on the Lenovo Storage Datastore continued to operate smoothly even after we shut down the iSCSI interfaces on Controller Node1. Further testing showed that keeping only one port active from each controller for all ports that are part of the iSCSI port set yielded good results, confirming that multipath functionality is intact. Not sure, how to fix the errors seen in the GUI. Attaching the screenshots
... View more
Greetings everyone, I would like to know if it is possible to change the type of a volume from "Temporary Volume" to "Flexible Volume" in ONTAP. Thank you.
... View more
Is there a way to view the available space in an aggregate within a data vserver? If I'm going to increase or create a volume in the aggregate, I would like to know that there is enough room. Is there a field for one of the commands that shows the available / used per aggregate?
... View more
