We are considering going from OnTap 9.3 directly to 9.7 in a single upgrade.  We have a AFF300, FAS2650 and FAS2620 systems.  Has anyone gone this route and how did it go.    I have never done multiple versions is a single upgrade. ... View more

  We recently placed in production a FAS 8300 (9.14.1P6).  We had a FAS2650 for seven years.   We built a Windows 2019 with ActiveIQ Unified Manager 9.14.   When we first tried  to add the ONTAP to the Unified Manager, it told us the self signed cert has already been expired.  We followed the instructions below   https://kb.netapp.com/on-prem/ontap/DM/System_Manager/SM-KBs/How_to_renew_an_ONTAP_selfsigned_certificate_via_System_Manager    Under the client/server certificates tab, we renewed the self signed cert for the expired SVM self signed cert in which we got a new self signed cert with a new name.  Then we deleted the original self signed cert (SVM).  Then we did the same and renewed the cert for the cluster but we didn't remove the expired self signed cert (cluster).   We went through the process again to add the ONTAP cluster but it would just hang forever with the spinning circle.   We have a few questions as a result of this process.      1) The renewal of the certs does not affect users access on CIFS shares?     2) How do we fix the issue described above (trying to add ONTAP onto ActiveIQ Unified Manager).   SVHO             ... View more

Hello and sorry for my english,   My cluster is synchronyze with NTP servers. If i do "cluster date show" i can see that the synchronization is good and the command "cluster date show" say that the time is good.   But when i want to initialize SnapLock compliance clock for snapshot lock, the system display me time with 10 minutes late. So, it is normal ? i can initialize or not ? thanks a lot ... View more

Hello: I plan to use the snapmirror for data migration. Because a quota is configured on the source end, I plan to configure a volume quota on the destination end after the snapmirror is transferred and disconnected. Will the quota be the same as that on the source end? For example, on the source end, I limit the size of a user to 100GB, and the user has used 50GB I re-configure quotas on the destination end after the migration to check whether the quotas will be re-restricted ... View more

Hello everyone, Could someone explain to me what the procedure to remove the disks from one storage to be able to install in another, I need to empty an entire Shelf of disk but I need to do in parts removing half of the disks at a time, I've checked and they are not shared and I've already emptied one of the aggregates. ... View more