Hi All, I have run into snapmirror transfer errors due to the destination is being full. However the destination volume is not full, rather one of the two constituents is: > volume show -is-constituent true Vserver Volume Aggregate State Type Size Available Used% --------- ------------ ------------ ---------- ---- ---------- ---------- ----- <--snip--> aggr_01_2 online DP 100TB 16KB 99% aggr_01_1 online DP 60TB 20.59TB 65% When I increased the size of the Volume ontap added the additional space to the constituent that was not full while leaving the constituent that was full in the full state. volume modify -vserver name -volume My_1_vault -size +20TB <---snip---> aggr_01_2 online DP 100TB 16KB 99% <<< NO increase aggr_01_1 online DP 100.00TB 60.59TB 39% <<< 40TB increase Is there any way to increase one specific constituent? I was thinking that I could add a third constituent but it would still leave the full constituent full. Thank you for any ideas to solve this! Bela
... View more
Hi All, I'm doing a piece of work where we have installed two new controllers in to our production six node cluster and im moving all the storage and anything the first four nodes host to the new nodes. The majority of our virtual machines and storage are presented via iscsi. Its come to my attention that I would need to create new lifs on the new nodes, which means i would then have to configure each virtual machine with the new entry IP for iscsi which would be a pain. The easiest and quickest solution would be for us to migrate the iscsi lif thats on node1 to node 5/6. Not sure if this is possible. - if its possible would it cause any downtime or disruption to any services etc? thanks
... View more
We have been using a FAS2750 for years, and since last week with ONTAP 9.15.1P7 (this was necessary because we have acquired a C60 as a successor system and want to transfer the data there soon). As of today, the AIQUM (9.16) that we are using can no longer connect to the FAS2750. Under "Storage Management" / "Cluster Setup" the "Operation State" only shows "failed". Yesterday, a new certificate was issued by the AIQUM and transferred to the FAS2750. Today we also had to issue a new certificate for the AIQUM. This was also transferred to the FAS2750. Could there be a connection? We have already deleted the two newly created certificates on the 2750 and recreated the certificate on the AIQUM using "regenerate", without success.
... View more
Hello all, My user have a FAS2554 (Data ontap 8.2.5P5), after a reboot , intut "license show "command ,hint "License database is not available at this time". according to KB, reboot FAS2554,The problem still exists. it can be used normally, but the backup software prompt does not have permission. Can who help me .
... View more
Thu Jan 21 01:20:06 CET 2021 ScheduledUpdate[Jan 21 01:05:00]:<ID> Operation-Uuid=<ID> Group=none Operation-Cookie=0 action=Defer source=Cluster1:vol_source destination=Cluster2:vol_dest status=Failure message=Transfer failed.(Replication operation request failed from Cluster Id: <ID>, Node Id: <ID> to Cluster Id: <ID>, Node Id: <ID> due to a network error(CSM: Operation referred to a non-existent session.))
... View more