need advance adding new shelves with SSD disks

[Aldous]

Hi, 

We have HA Controllers/Node model: FAS2552 with one DS2246 with SAS HDDs; we are adding two new shelves model: DS2246 with total of 24 SSD. Should we create two new Aggregates (11 disk each + spare) in order to distribute the loads on two controllers (Active/Active). Is it possible to create one aggregates to include all disks while I still can have Active/Active?
I saw some discussion about ADP which may include all 22 disks + spares and sharing two Aggregates by partitioning. However, I can't find the procedures to do that. 

Thanks

Aldous

[TMACMD · Accepted solution]

In all likelihood ADP will not come into play here. You will use whole disks

 With 24, you could do a single raid group on one node if you need the aggregate that big. I think most would suggest splitting between the nodes and make two aggregates. Leave a spare pet node. 

[cruxrealm]

Assuming the new shelf has the same type of drive.  You can always just add them to the existing aggregates evenly.

[Sanaman]

Current disks are HDDs and new ones are SSDs. You must create new aggregates (either one or two). Two will spread the load between two controllers as TMACMD said

[Aldous]

Thanks everyone. I've created two aggregates.