ONTAP Hardware

BMC shell sensors question

justinfibe
852 Views

The BMC Shell command sensors show found that the CPU status is Bad
Does this situation mean that the controller needs to be replaced?

擷取3.PNGThank you

1 ACCEPTED SOLUTION

aladd
849 Views

This likely needs addressed with HW replacement, as the indication for 1.2v to the CPU is well below the critical low threshold.

 

Please open a support case to have this addressed.

View solution in original post

1 REPLY 1

aladd
850 Views

This likely needs addressed with HW replacement, as the indication for 1.2v to the CPU is well below the critical low threshold.

 

Please open a support case to have this addressed.

Public