ONTAP Hardware

Cluster management Lif operational status: Down

Mocha_1982
3,897 Views

Hi All 

 

I am building a new cluster FAS8060 with OnTap 8.3.1 P1 and run into strange issue .....

 

When I failover from node 1 to 2, all works fine (data, cluster) except cluster-mgmet lif shows operational status: down ..

 

Also I also seeing a strange lif and not able to see/remove 

 

cluster01::*> net int show -vserver cluster01 -lif
56181089-a41b-11e5-87e3-cda87b04185f_mgmt1  <============
cluster_mgmt
node01_mgmt1
node02_mgmt1

 

When I failover from node 1 to 2; I lost access to Cluster management IP (https/ssh), but ping still going through .... when both node are up firewall is seeing mac collision for the Cluster management IP address from both node ...

 

I am building another cluster at another datacenter with the same hardware, config and network setup; failover all works smoothly no issue at all. 

 

Anyone one ran into similar issue before or suggestion where to look first ? 

1 REPLY 1

Jeff_Yao
3,823 Views

hi

 

try this kb to see if help

https://kb.netapp.com/support/index?page=content&id=1013870

if not, you might need to open a case for the dup mac address

Public