ONTAP Hardware

Could someone please help me by sharing the firmware for FAS8040 SP version 3.12?

John_He
126 Views

Hello everyone, sorry to bother you.

           I have a FAS8040 storage device, and one of the controllers has a Primary firmware failure that requires repair. However, I do not have FAS8040 SP firmware and do not have permission to download it. I wonder if any friends can help share it. Any version that is the same or lower than 3.12 is acceptable.

         The English is too poor, the translation tool has been used to translate it. Thank you very much!

 

SP fas8040-01*> sp status
Firmware Version: 3.1.2
Mgmt MAC Address: 00:A0:98:9E:8C:9A
Ethernet Link: Up, 100Mb, Full-Duplex, Auto-neg enabled,completed
Using DHCP: no
IPv4 configuration:
IP Address: 172.16.14.66
Netmask: 255.255.255.0
Gateway: 172.16.14.1
IPv6 configuration: Disabled
Running Backup Firmware

 

SP fas8040-01*> version
Booted backup firmware version 3.1.2
Primary firmware version 3.1.2
Backup firmware version 3.1.2
Running Backup Firmware

1 ACCEPTED SOLUTION

Amador
100 Views

When fixed the permission to download it, you can find all the available firmware for this platform in the "Full Firmware Report" section of NetApp Hardware Universe

View solution in original post

1 REPLY 1

Amador
101 Views

When fixed the permission to download it, you can find all the available firmware for this platform in the "Full Firmware Report" section of NetApp Hardware Universe

Public