ONTAP Hardware

DS224C and DS2246 spares

HenryJ
1,397 Views

Hello

I'm new to NetApp and wanted to know if it is possible to use disks from DS2246 e.g. X425 1.2TB on DS224C?

Also, what is the difference between DS2246 and DS224C?

 

Thank you

1 ACCEPTED SOLUTION

aladd
1,334 Views

Yes, these disks are compatible, as specified above.

 

Supported drive section in HWU for each lists the X425A-R6 drives

 

aladd_0-1642474524422.png

aladd_1-1642474548444.png

 

Depending on the state and ownership of the disks and the system you will be putting them into, there may be a process to update ownership and clear the drives before use.

 

 

 

View solution in original post

2 REPLIES 2

Ontapforrum
1,353 Views

DS2246 = 6 designates = 6gbps - max backplane IO SAS Speed of the Shelf
DS224C = 'C' designates = 12gbps - max backplane IO SAS Speed of the Shelf (C represents number '12' in Hexadecimal format).

 

Both packs 24 drives per enclosure in 2U rack unit size.

According to IMT, DS224C Does show support for - X425A-R6 drive (1.2TB, 10K, BCS)


But, check it yourself:
https://hwu.netapp.com/

aladd
1,335 Views

Yes, these disks are compatible, as specified above.

 

Supported drive section in HWU for each lists the X425A-R6 drives

 

aladd_0-1642474524422.png

aladd_1-1642474548444.png

 

Depending on the state and ownership of the disks and the system you will be putting them into, there may be a process to update ownership and clear the drives before use.

 

 

 

Public