Hello we are running Ontap 9.2
We are monitoring hardware performance and regularly during the day especially in afternoon hours we see spikes in CPU usage up to 90%
Is there a way to discover what the cause is?
We were running some commands
priv set diag;statit -b
priv set diag;statit –e
sysstat -x
Attached are some results and comparison of 2 different results.
The spikes are for few seconds and goes down to 20%.
Thank you,
Martin
ANY AVG CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
44% 14% 9% 9% 10% 9% 7% 9% 30% 29%
65% 20% 12% 11% 12% 13% 8% 11% 45% 45%
43% 12% 7% 7% 7% 7% 5% 6% 29% 29%
42% 11% 6% 5% 6% 6% 4% 5% 28% 28%
100% 73% 67% 72% 65% 69% 60% 67% 91% 91%
100% 71% 64% 67% 61% 63% 55% 75% 90% 90%
99% 76% 71% 70% 69% 67% 63% 90% 89% 89%
100% 95% 94% 94% 94% 94% 94% 98% 98% 98%
97% 63% 55% 55% 54% 53% 48% 81% 82% 81%
100% 56% 46% 42% 43% 37% 34% 79% 81% 82%
87% 45% 33% 27% 41% 36% 37% 62% 61% 59%
35% 12% 5% 5% 15% 15% 15% 14% 14% 14%
30% 10% 3% 3% 12% 12% 12% 12% 11% 11%
29% 10% 3% 3% 11% 12% 12% 12% 11% 12%
38% 13% 5% 4% 16% 16% 16% 16% 16% 16%
40% 14% 8% 6% 13% 14% 13% 13% 22% 21%
73% 29% 22% 20% 20% 21% 14% 24% 55% 54%
73% 26% 19% 23% 25% 20% 14% 19% 43% 43%
.png){kind=link}
.png){kind=link}