ONTAP Hardware

FAS2040 blowing Power Supplies

ETB
1,532 Views

Hi all,

 

We have moved hardware from our Netherlands to Scotland site.  All equipment was working in NL and was powered down correctly and professionally transported.

 

Included in the move are 6x FAS2040.  So far all PSUs from 3 have blown on power up.

 

Any ideas?

 

Power Supplys fitted are CP-1103R2

1 REPLY 1

Renifa
1,488 Views

Hi,

 

Is there an error message displayed? Check the following link which gives useful information about power supply issues.

https://kb.netapp.com/support/index?page=content&id=3013824#Anchor1

 

Hope this helps.

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Public