Is It supported to connect on a FAS2040HA, 2x DS14mk2 and 1x DS4243 in order to move the data between the DS14mk2 / DS4243?
I don't see this configuration on the document "Configuration Rules and Examples for FAS20xx Systems" (215-03642_D0.pdf).
I wish to move the date from the aggregate on the 2x DS14mk2 to a new aggregate on the 1x DS4243.
I plan to remove the 2x DS14mk2 after the migration on the DS4243.
Thanks in advance for your feedback.
See The Solution
DS4243 needed to attached to SAS port and DS14mk2 (2 in one stack)to the FC port on the contoller.
It should work.
View solution in original post
I have just done the intervention and it works.
Let's walk you through the new & improved Knowledge Base and further enrich your experience with NetApp Products.
Join our Discord Community