Hi, i'm new with netapp and have problem when connecting directly FAS2552 to Tape IBM TS3100. I already modify port type 0c to initiator and then try to online but failed. When i try to modify back to "target", 0c port can online
error:
hostname-02> fcadmin config -e 0c
hostname-02> Fri Dec 12 12:23:59 GMT hostname-02:fci.adapter.onlining:info]: Onlining Fibre Channel adapter 0c.
Fri Dec 12 12:23:59 GMT [hostname02:fci.adapter.online.failed:error]: Fibre Channel adapter 0c failed to come online.
Hostname-02> ucadmin show
Current Current Pending Pending Admin
Adapter Mode Type Mode Type Status
------- ------- --------- ------- --------- -------
0c fc initiator - - offline
0d fc target - - online
0e cna target - - online
0f cna target - - online
hostname-02> fcadmin config
Warning: This command is deprecated. Use the ucadmin command to configure adapters.
Local
Adapter Type State Status
---------------------------------------------------
0c initiator CONFIGURED offline
0d target CONFIGURED online
can you help me, what is the problem?
