ONTAP Hardware

FAS2750 Monitoring of power supply via SNMP

GreenHornP
2,104 Views

Hello, 

I have issue with monitoring via SNMP. We had issue with power supply, but alert didn´t start. So when I analyze issue, all seems right in monitoring. 

 

OID seems correct

1.3.6.1.4.1.789.1.21.1.2.1.15enclPowerSuppliesFailed

 

But when I try snmwalk, so output seems empty.

SNMPv2-SMI::enterprises.789.1.21.1.2.1.15.1 = ""

 

I'm not sure what should be in parentheses when there's a power problem.

Can anyone advise me what is wrong and how can I fix this problem?

 

Thank you very much

 

1 ACCEPTED SOLUTION

andris
2,032 Views

The .1 after .15 is the shelf ID number. Is the FAS2750 enclosure shelf "1"?
"" (null) = neither PSU is failed.

1 = PSU1 is failed.

2 = PSU2 is failed.

View solution in original post

2 REPLIES 2

andris
2,033 Views

The .1 after .15 is the shelf ID number. Is the FAS2750 enclosure shelf "1"?
"" (null) = neither PSU is failed.

1 = PSU1 is failed.

2 = PSU2 is failed.

GreenHornP
1,997 Views

Thank you for response. I test it and all is running. And I found next possible OID - 

 

.iso.org.dod.internet.private.enterprises.789.1.2.2.25.0

OCTET STRING - The system's global status is normal.

 

It is good basic overview.

Public