Dear all,
I have a FAS3220 runing NetApp Release 8.2.5P1 7-Mode. Slot 2 in the controller has a QLogic card in it but the card is offline:
slot 2: Fibre Channel Target Host Adapter 2a
(QLogic 2532 (2562) rev. 2, <OFFLINED BY USER/SYSTEM>)
Board Name: QLE2562
Serial Number: BFD1248F51482
Firmware rev: 5.8.0
Preload Rev: 3.3.2
Host Port Addr: 000000
FC Nodename: 50:0a:09:80:88:d1:d5:03 (500a098088d1d503)
FC Portname: 50:0a:09:81:88:d1:d5:03 (500a098188d1d503)
Connection: No link
Switch Port: Unknown
SFP Vendor Name: FINISAR CORP. (Warning: SFP info not updated when port is OFFLINE)
SFP Vendor P/N: FTLF8528P3BCV-QL
SFP Vendor Rev: A
SFP Serial No.: PNB3X2F
SFP Connector: LC
SFP Capabilities: 2, 4, 8 Gbit/Sec
I/O base 0x00000000ffffff00, size 0x100
memory mapped I/O base 0xded00000, size 0x4000
The card show up in the ucadmin command:
FAS3220> ucadmin show
Current Current Pending Pending Admin
Adapter Mode Type Mode Type Status
------- ------- --------- ------- --------- -------
0c fc initiator - - offline
0d fc initiator - - offline
2a fc target - - offline
2b fc target - - offline
3a fc initiator - - offline
3b fc initiator - - offline
3c fc initiator - - offline
3d fc initiator - - offline
How can I bring the card online again ?
Best regards,
Johnny Begood.
