I have a FAS 2040 system where only one controller (ctl1) was previously installed.
I installed yesterday and configured a new shelf, assign disk for the second controller (ctl2).
In boot menu I have choose :
(7) Install new software first.
--> Update the system from 8.02 to 8.1
But now I have afraid to choose:
(4) Clean configuration and initialize all disks.
The ctl1 is on production... aggr, vol, lun...
Does this option initialize all disks from all the enclosure and erase ctl1 disks?
Or erase only all disk owned by ctl2 where I launch boot menu?
Thanks you very much for your help.
See The Solution
I found the solution...
For someone who want to know how...
In boot menu
5) Maintenance mode boot.
*> disks assign -o <filername> -s <filerID>
*> disk show
## You can show all disk assign by the system
## The node will reboot
ctrl+C Enter in boot menu
## The menu had changed
(4) Clean configuration and initialize x disks (owned by the system).
Now you can safety reinstall your system.
View solution in original post
NetApp Wins One Silver and One Bronze Stevie® Award in 2022 Stevie Awards for Sales and Customer Service
Live Chat, Watch Parties, and More!
Engage digitally throughout the sales process, from product discovery to conﬁguration, and handle all your post-purchase needs.