I'm hoping you can help a new guy out. I have just recently upgrade our FAS3020C units to 7.3.1. However of the 2 appliances one has the following error when rebooting.
nvram: Need to update primary image on flash from version 5 to 7
nvram: Need to update secondary image on flash from version 5 to 7
VALID DATA in memory. Can't update firmware!
tavor_init: Fail update firmware, code = 26
Thu Feb 19 18:46:16 GMT [nvram.new.ucode.fail:CRITICAL]: Fail to update new NVRAM microcode, error fail to update flash because of a dirty shutdown
I'm very new to the netapp and using this setup as a test ground from our VM backups. Please let me know if you need any additional info.