Community maintenance is complete. Thank you for your patience!

ONTAP Hardware

Partner Disk FAS 2040

syedkhan

Hello,

 

      We have Single FAS 2040 on our Disaster recovery site which we use it for snapmirror. Last few dasy back we installed a new hard drive but unfortunately its detected as a prtner instead of unowned. I know in high availibilty env partner is used.

 

and also if I see from the Command Line using disk show -v 

 


Netappdr> disk show -v
DISK OWNER POOL SERIAL NUMBER HOME
------------ ------------- ----- ------------- -------------
0d.01.0 Netappdr (142258223) Pool0 YHHXR5EA Netappdr (142258223)
0d.01.11 Netappdr (142258223) Pool0 YHGYW50A Netappdr (142258223)
0d.01.8 Netappdr (142258223) Pool0 YHGYZLXA Netappdr (142258223)
0d.01.9 Netappdr (142258223) Pool0 YHGYW4VA Netappdr (142258223)
0d.01.5 Netappdr (142258223) Pool0 YHGYWYBA Netappdr (142258223)
0d.01.7 Netappdr (142258223) Pool0 YHGYVURA Netappdr (142258223)
0d.01.2 Netappdr (142258223) Pool0 YHGYYZPA Netappdr (142258223)
0d.01.10 Netappdr (142258223) Pool0 YHGYX1RA Netappdr (142258223)
0d.01.4 Netappdr (142258223) Pool0 YHGZ0KRA Netappdr (142258223)
0d.01.3 Netappdr (142258223) Pool0 YHGYX7MA Netappdr (142258223)
0d.01.6 Netappdr (142258223) Pool0 YHGYW49A Netappdr (142258223)
0d.01.1 Netappdr (142258223) Pool0 YHGYWSAA Netappdr (142258223)
0d.01.12 netappctrl1(1574746261) Pool0 Z29394KM netappctrl1(1574746261)

I need to netapp ctrl1 is located in the Head office and why its detecting directly ? I need it to remove from Netappctrl1 to locally which is netappdr

 

1 ACCEPTED SOLUTION

Anoop

Hi,

 

The correct procedure can be found below:

 

https://kb.netapp.com/support/index?page=content&id=1015293

https://library.netapp.com/ecmdocs/ECMP1511539/html/storage/disk/assign.html

 

Hope this helps.

 

Regards,

Anoop

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

3 REPLIES 3

Naveenkumarp22

You can use the below command.

 

Netappcntrl1  : priv set advanced

Netappcntrl1 *: disk remove_ownership 0d.01.12

Netappcntrl1 *: priv set admin

Netappcntrl1 : disk show -n

 

log in to Netappdr

 

Netappdr : disk assign 0d.01.12

syedkhan

It worked this way just need your inputs if its correct

 

disk assign 0d.01.12 -s unowned -f

 

it went to unowned 

 

disk assign 0d.01.12

 

then added to aggregate

 

 

 

Anoop

Hi,

 

The correct procedure can be found below:

 

https://kb.netapp.com/support/index?page=content&id=1015293

https://library.netapp.com/ecmdocs/ECMP1511539/html/storage/disk/assign.html

 

Hope this helps.

 

Regards,

Anoop

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public