ONTAP Hardware

Powersupply Error

VenkateshChennai
2,720 Views

Channel: 0a
        Shelf: 12
        SES device path: local access: 3a.12.99
        Module type: IOM3; monitoring is active
        Shelf status: unrecoverable condition
        SES Configuration, shelf 12:
         logical identifier=0x50050cc102019c11
         vendor identification=NETAPP
         product identification=DS4243
         product revision level=0211
        Vendor-specific information:
         Product Serial Number: SHU0954292N08CS
        Status reads attempted: 4151217; failed: 0
        Control writes attempted: 0; failed: 0
        Shelf bays with disk devices installed:
          23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0
          with error: none
        Power Supply installed element list: 1, 2, 3, 4; with error: 1
        Power Supply information by element:
          [1] Serial number: PMW82562005794C  Part number: 0082562-12
              Type: 9C
              Firmware version: 0311  Swaps: 0
          [2] Serial number: PMW82562005791D  Part number: 0082562-12
              Type: 9C
              Firmware version: 0311  Swaps: 0
          [3] Serial number: PMW82562005793B  Part number: 0082562-12
              Type: 9C
              Firmware version: 0311  Swaps: 0
          [4] Serial number: PMW825620057946  Part number: 0082562-12
              Type: 9C
              Firmware version: 0311  Swaps: 0
        Voltage Sensor installed element list: 1, 3, 4, 5, 6, 7, 8; with error: none
        Shelf voltages by element:
          [1] 3.05 Volts  Normal voltage range
          [2] Unavailable
          [3] 5.01 Volts  Normal voltage range
          [4] 12.02 Volts  Normal voltage range
          [5] 5.01 Volts  Normal voltage range
          [6] 12.02 Volts  Normal voltage range
          [7] 5.01 Volts  Normal voltage range
          [8] 12.03 Volts  Normal voltage range
        Current Sensor installed element list: 1, 2, 3, 4, 5, 6, 7, 8; with error: none
        Shelf currents by element:
          [1] 660 mA  Normal current range
          [2] 540 mA  Normal current range
          [3] 4600 mA  Normal current range
          [4] 6750 mA  Normal current range
          [5] 3320 mA  Normal current range
          [6] 9680 mA  Normal current range
          [7] 3080 mA  Normal current range
          [8] 6950 mA  Normal current range

 

 

Powersupply shows with error: 1.

System has 4nos power supplies. How many Powersupply failure does this Shelf can withstand. If so in what order.

Please explain how redundancy is planned in Powersupply

 

Thank you

2 REPLIES 2

Jeff_Yao
2,672 Views

for 4 PSUs DS4243, your filer should be able to withstand 2 faulted PSUs. position doesnt matter. but pls replace the faulted one asap. 

VenkateshChennai
2,661 Views

Thanks for the Info, we had arranged for replacement and it is compled

Thanks again

Public