I've recently bought a couple of FAS2520's with dual controllers each and 2x DS2246 shelves with everything populated with 900GB SAS drives. I got these a very good price for learning purposes.
The previous user of these haphazardly wiped them and whilst they have ONTAP still installed, they are in a mess in terms of configuration/setup.
I am also completely new to the NetApp platform, so learning as I go along.
I am concentrating on the one SAN right now - It has 2x controllers both running 8.2.3 7-Mode. The previous user has lost all licence details - so that's another thing to sort out. I have another community thread open on that.
The first thing is, I have gone into the CTRL+C and done a option 4 wipe on both controllers. I've then setup all the parameters, so I have SSH access into ONTAP on both.
The main reason for this particular post though is that a password appears to be set on the service processor on each controller but I cannot find how to reset this. I have tried the default of admin / netapp!123, but that doesn't work. The previous owner told me a password, but that didn't work either.
Is there a way, through either the serial console or via the ONTAP CLI to reset the service processor password so I can gain SSH access?
Thanks.