Hello all   On solidfire  Element OS Version 11.8.0.23 I added a new vlan:    vlan tag: 202    SVIP: 10.1.2.240    VRF enabled: No   From RHEL 8.2 server, which has interface in the same vlan, when I try to discover targets on SVIP I got failed authorization, but I am sure the account and initiator/target secret are similar to those credentials on RHEL server ! [root@rhvh11 ~]# cat /etc/iscsi/iscsid.conf ... node.session.auth.authmethod = CHAP node.session.auth.chap_algs = SHA3-256,SHA256,SHA1,MD5 node.session.auth.username = rhvuser node.session.auth.password = rhvpassword node.session.auth.username_in = rhvuser node.session.auth.password_in = rhvpassword discovery.sendtargets.auth.authmethod = CHAP discovery.sendtargets.auth.username = rhvuser discovery.sendtargets.auth.password = rhvpassword discovery.sendtargets.auth.username_in = rhvuser discovery.sendtargets.auth.password_in = rhvpassword ...   [root@rhvh11 ~]# iscsiadm -m discovery --type sendtargets --portal 10.1.2.240:3260 iscsiadm: Login failed to authenticate with target iscsiadm: discovery login to 10.1.2.240 rejected: initiator failed authorization iscsiadm: Could not perform SendTargets discovery: iSCSI login failed due to authorization failure   [root@rhvh11 ~]# nc -vz -w3 10.1.2.240 3260 Ncat: Version 7.70 ( https://nmap.org/ncat ) Ncat: Connected to 10.1.2.240:3260. Ncat: 0 bytes sent, 0 bytes received in 0.01 seconds.   [root@rhvh11 ~]# ping -c1 10.1.2.240 PING 10.1.2.240 (10.1.2.240) 56(84) bytes of data. 64 bytes from 10.1.2.240: icmp_seq=1 ttl=64 time=0.115 ms --- 10.1.2.240 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.115/0.115/0.115/0.000 ms   On solidfire element web UI, I cannot see any related message in "Event Log" tab ... View more

When the customer inquired via case, the answer was that the latency displayed in ActiveIQ includes the communication time between the client and SolidFire. Also, the answer was that there was no past performance data in SupportBundle. (Latency of Solid alone cannot be checked from SupportBundle.)   In this case, do I need to choose the following method to check the past Latency of Solidfire alone?   ・Using OnCommand Insight/Cloud Insignt ・Using Grafana (https://grafana.com/grafana/dashboards/14025)   Or is it not possible to check the latency of Solidfire alone, because the latency information is based on the time it takes for the client to respond with an ACK after the packet arrives successfully? ... View more

When using SolidFire in Openstack, when a volume is deleted, it is both deleted and purged. However, when the volume is scheduled to be purged on the Solidfire side, the trap is raised because there is no volume .   Do you have any examples of how you are trying to suppress Trap in such an environment? ... View more

Hello,   Nessus scan discover CVE-2008-5161 HCI IPMI Weak MAC Algorithms as below, I cannot found below solution from google or NetApp support portal, anyone advise?   71049 - SSH Weak MAC Algorithms Enabled Synopsis The remote SSH server is configured to allow MD5 and 96-bit MAC algorithms. Description The remote SSH server is configured to allow either MD5 or 96-bit MAC algorithms, both of which are considered weak. Note that this plugin only checks for the options of the SSH server, and it does not check for vulnerable software versions. Solution Contact the vendor or consult product documentation to disable MD5 and 96-bit MAC algorithms. Risk Factor Low     Best regards,   Chung ... View more

I have been tasked with replacing a SOlidFire cluster with an AFF-A250. Looking for a methodology to move the data off the SolidFire and onto the new AFF-A250 ... View more