I'd be interested to hear what it was at this point.. you would have done everything i would have covered right off the bat. The only other thing, which i'm sure you check is your aggr didn't run out of space on the dst
... View more
Well since you have tried them all and it only took one hour.. what are you thinking.. Offline delete the old target, recreate - restrice and start over - If you tried that, then open a case..
... View more
Ok, at this point you can weigh how long it took to copy the initial 328 vs a full restrict and initialize But I would try update -S and if that doesn't work, try initialize -S again If that doesn't work, you can just offline delete and restart
... View more
First, let me give you some advice. NEVER EVER EVER NEVER EVER NEVER use mandatory scan on. You are asking for problems. Also, your abort timeout is set wrong. It should be 40seconds and you should work with your a/v team to confirm theirs is 50seconds. Also, we only configure the vscan at the host layer and then refence the option below vscan options use_host_scanners on
... View more
That's a terrible interview question... sorry... It's irrellevant. Sysconfig -a is the answer ... Or powershell.. Anyways, 7-mode is no more. You need to focus on cDOT or Ontap 9
... View more
Nope that's wrong again.. You probably mean 2552 or 2554. The easiest way to upgrade 7-mode is to log into now.netapp.com and run an upgrade advisor, It will tell you all the steps you need to do
... View more
To this today, i still dont' understand how people run RC code in production. It boggles my mind.. You should look into upgrading when you get your shelf/disk fixed. And I would call support
... View more
When is the last time the controller has been rebooted? I'm just curious. Also, I would use the date command to set the date and then turn off time off and on options timed.enable off options timed.enable on and then if that still doesn't work, run a packet trace from the vif to the time server
... View more
We don't like to do that. Also, i see your default setting is max. We never do that, we leave it as min and let the app control it. Which app are you talking about?
... View more
show me vol options on the volume? https://library.netapp.com/ecmdocs/ECMP1196889/html/GUID-6FFE24E8-A8C1-4520-A9FD-B7EA07964D49.html Is there an app that is sending it read-only and controlling the locking?
... View more
When you mixed disks as per Netapp guide, the entire raid-group will lower to 10K. If this is a low latency app, just proceed with caution But you really need to upgrade these controllers. You should focus your efforts on that.
... View more
time to upgrade my friend.. 7.3.5p1.. That's very old.. Also, i never heard of a 7500 RPM SAS disk. .. B/c you have a 15K drive, you should replace with same
... View more
NFS mounts are done "differently" in CDOT. They are with policys' and rules. Easiest way to look at them is with GUI But you can look at export-policy show or rule show, etc..
... View more
I can tell you that I tried it in my lab and it worked, but its not something that I would recommend. Private IP's are free.... node-mgmt /24 - That's just my recommendation
... View more
This question comes up a lot. It's all about your workload and how you want to split up your name space and SVM's. We aren't going to be able to make that decision for you. Just think big picture and the future, plus overhead with management. What are you putting on this SVM, Home Drives, business shares, etc...
... View more
