Ok, you are a little ahead of yourself. What are teh 7-mode filers serving? Cifs/NFS, vfilers, etc.... ALso, since this is a two node cDOT cluster, you have to make sure you setup the proper options... How familiar are you with cDOT?
... View more
When you are running your packet trace, depening on the node, you need to point it to a directory so for example pktt -d /etc/crash - then when you access your SPI, they are located in there
... View more
from doc 3.4 Free Space Reallocate and Read Reallocate When enabling free space reallocation on an aggregate, also consider enabling read reallocate space_optimized for the volumes in the aggregate. The two are complementary technologies that help maintain optimal layout. Read reallocate will optimize the system for sequential reads on the fly, while free space reallocate will optimize for writes.
... View more
IM sorry, I thought I asked if Disks' were added, but I didn't until later.. Also, as per the TR, the associated aggr option needs to be set with the vol option.
... View more
You did not answer my first question. Have you added any disks? And did you run re-allocate measure? Also, it seems they pulled 3929, but see if you can find it online and take a read thru of it
... View more
^^ You can use powershell, But like I said, if you are focusing on that many, you should focus on Netgroups. Also, you should considering upgrading your cluster to 8.3.1, especially, since it appears you are running a D1 release
... View more
Well, this isn't that hard, but you have to start be reading the getting started with powershell documentation. RSH should be eliminated at all cause b/c of the massive security hole, so you are going down the correct route.. I'm not going to write it before you, but you can get started by reading the help for the powershell toolkit Connect to controllers via https or rpc with connect-nacontroller Also, For any help, you can do get-nahelp *quota*
... View more
There is no such thing as ZERO downtime for CIFS on ontap 7-mode. Also, if you are running an older version of ontap, you should look to upgrade. And to ensure your takeover and giveback will not have any problems, you should run a config advisor against your cluster
... View more
Google is your friend - https://kb.netapp.com/support/index?page=content&id=3011926&pmv=print&impressions=false anyways, since you are new good luck... and 6040's are very old.. Should upgrade
... View more
We need more information here You mention latency, but we need to see charts.. Also, are your charts reflective of avg_latency.. Do you have OCUM running? What is your disk/raid group setup
... View more
