Hi Vladimir, Here is the link to the  bugs online. Pls create a case and add it to the bug. http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=508070 Regards adai ... View more

Can you paste the output of dfm host diag ? to find if you have reduced any monitoring interval. Also can you guarntee(allocate) some memory to your VM instead of everything being dynamically being allocated. Regards adai ... View more

Hi Modi,      DFM use the hostprimaryaddress for snmp and API based monitoring. Where as when doing the VSM update it would initiate the appropriate commands with the hostpreferredAddr1&2. Per say dfm does not need connectivity to the hostpreferredAddr1&2, but your storage controllers( src and dst need to be able to communicate using the hostpreferredAddr1&2. set in dfm.) Hope this clarifies. Regards adai ... View more

What version of dfm are you using ? Regards adai ... View more

Hi Soeren,      Is the filer running 8.0.2P3 in Cluster Mode or 7Mode ? What version of DFM are you using ? Regards adai ... View more

You can create an alarm when an event is generated, As part of the alarm you can kick in a script. This script can be the one which goes to the filer and collects perfstat. In the below link there is a how to on the same. https://communities.netapp.com/people/fenton/blog/2011/02/22/diy-guide-to-integrating-perfstat-to-performance-advisor Incase of client stats the following events are generated. [root@ ~]# dfm eventtype list | grep -i clie cifs-per-client-stats-disabled                Normal       cifs.perclientstats cifs-per-client-stats-enabled                 Warning      cifs.perclientstats nfs-per-client-stats-disabled                 Normal       nfs.perclientstats nfs-per-client-stats-enabled                  Warning      nfs.perclientstats [root@ ~]# Regards adai ... View more

Hi clinton, Let me explain the situation. Say i create a volume snapmirror between two filers f1 and f2.In order to make sure that the VSM update always succed and to avoid constant resizing of the vsm destination volume I create the volume to the size of the aggr. So if i have a source volume f1:v1 of 10g and aggr on filer f2: of size 100G. now in order to create a VSM destination volume on filer f2 i create a volume v2 of size 100G with guarntee set to none. Now, once the VSM baseline is completed. On the destination filer f2. df -h will give the size of f2:v2 as 10G( same as source) where as vol size v2 will give the size as 100G( the size to which it was created) so my question now is does running Get-NaVolSize will it reutrn 10g or 100G ? I am looking for the command that will list 100G and not 10G. Regards adai ... View more

Hi Hadrian, Automatic collection of client statistics is based on the values of the following global options: autoClientStatEnabled (default value No😞 specifies if automatic collection of client statistics is enabled. clientStatThresholdPeriod (default value 300😞 specifies the period, in seconds, over which the following thresholds should be evaluated. clientStatCifsLatency (default value 30😞 specifies the percentage increase in CIFS latency over the period. clientStatCpuThreshold (default value 80😞 specifies the absolute, last available, value of the cpu_busy counter. clientStatNfsLatency (default value 30😞 specifies the percentage increase in NFS latency over the period. This applies to both NFSv3 and NFSv4. clientStatTotalOpsRate (default value 30😞 specifies the percentage increase in total operations over the period. There are two sets of thresholds based on the above values: If both the total_ops threshold and the CPU busy threshold are breached, automatic collection of client statistics will be initiated. If the total_ops threshold and either of the NFS or CIFS latency thresholds are breached, then automatic collection of client statistics will be initiated. Regards adai ... View more

Hi Dan,      Pls refer the following worflow guide. http://now.netapp.com/NOW/knowledge/docs/oncommand/relcore50/pdfs/workflows.pdf Regards adai ... View more

The oncommand host package supports backup of vm that are hosted only on NetApp Storage and not non-netapp. For that use the OSSV version 3.0.1 to backup vm's hosted on non netapp to be backedup to netapp. Regards adai ... View more

Hi Mark,      Can you answer some of my questions so that I can help you ? What version of DFM server are you using ? What kind of relationship are you looking for in the reports ? SV/OSSV/QSM/VSM Is compression enabled on those relationship ? Are there vfiler based relationship ? Can you get the output of dfpm relationship list for the relationship for which you are looking at the data transfer report ? Regards adai ... View more

Hi Dan,      This release is available starting Aug 2011. Below is the link to the core and host package. Also refer to the GSS site for install and configuration of the same. https://now.netapp.com/NOW/download/software/occore_win/5.0/ https://now.netapp.com/NOW/cgi-bin/software/?product=OnCommand+Host+Package&platform=OnCommand+Core+Package+5.0 OnCommand 5.0 Installation OnCommand 5.0 Configuration Regards adai ... View more

Hi Can you reduce the nubmer of cpu from 4 to 1 and report on the performance ? How many controllers are you monitoring ? What all functionality of OnCommand are you using ? Protection ? Provisioning ? Performance  ? All ? Regards adai ... View more

Pls find attached a sample report created with the new product abbreviated OCIR. Also below is the link to the community of that product. http://communities.netapp.com/community/products_and_solutions/storage_management_software/oncommand-report Regards adai ... View more

I think the new product( free) named OnCommand Insight Report can generate such reports. Regards adai ... View more

Hi Michael,      This is being targeted for the GA release of 5.0.1. BTW can you add your case to this burt or share your case # for the same? Regards adai ... View more

Hi Steve,      Can you pls post the output of dfpm job detail for the failed job ? Regards adai ... View more

This may be a  known issue. Do a ondemand job, then your conformance status should not be shown as job_failure. Regards adai ... View more

Hi Scott,      Hope you are doing great.Pls find my response inline. Scott Swain wrote:   Hey Adai, Here are a few things I think may be handy to have….      Direct link to the event in the alerting email This is already there. Scott Swain wrote:   Hey Adai, Here are a few things I think may be handy to have….      Direct link to the event in the alerting email Ability to acknowledge the alert from the alerting email The ability to create custom email alert templates that can be applied based on per alert/event basis…. this way we can have specific emails sent to specific email addresses with info that pertains to what they need, not just a generic message… If we had the ability to identify a primary Group for a filer/vfiler, we could then set the alerting email to display that primary group. If Group naming reflects the role of the filer it will make it easier for non-storage admins to identify the use of the filer i.e. Incident Coordinators) There is likely a few more ‘nice to have’s’ but, that all I got off the top of my head atm.     Thanks, Scott The other things I shall pass them on to product managers. Regards adai ... View more

Hi Scott,      The e-mail customization is available for userquota alerts but not for other alerts. Can you give us couple of examples of what is being sent today and what is that you are looking for ? Regards adai ... View more

Hi Francesco,      Unfortunately this requirement did not make it for this release too. Regards adai ... View more