running both the new onecollect (for switches only) and config advisor.(flexpod, iscsi)
both are not capturing the data from the 9K switches correctly.
for instance, "show running-config" seems to be chopped well before the beginning. It is missing the first 130 lines!
It may be related to not correctly getting the data above, but the output of config advisor is also saying that TELNET is ENABLED and SSH is DISABLED and yet the opposite is true.
Also showing VLAN issues which I know are not true
Also showing issues when trying to use CDP. The Netapp side picks up the CDP info, but the switch is advertising the data from the peer-link. Therefor the data does not match up.
Logic could/should be in place to catch this as I am seeing it more frequently as a security mechanism on the switch.
also, the software mentions bootarg.init.switchless_cluster.enable is set to tru and should be set to "1" -> no place on the support site can I find this mentioned.
Please prove that that is correct. every document I find on the support site indicates that bootarg.init.switchless_cluster.enable=true is the correct way.