The transition to NetApp MS Azure AD B2C is complete. If you missed the pre-registration, you will be invited to register at next log in.
Please note that access to your NetApp data may take up to 1 hour.
To learn more, read the FAQ and watch the video.
Need assistance? Complete this form and select “Registration Issue” as the Feedback Category.

Active IQ Unified Manager Discussions

OPM Installation error - ocf-server package is not installed properly


I've attached the output below hoping someone has seen this before.


WARNING: Found existing config file /usr/my.cnf on the system.
Because this file might be in use, it was not replaced,
but was used in bootstrap (unless you used --defaults-file)
and when you later start the server.
The new default config file was created as /usr/my-new.cnf,
please compare it with your file and take the changes you need.

  Installing : ocie-server-1.3.0-2015.08.1013.x86_64                                                                                                                                                                                                                      6/12
  Installing : ocie-au-1.3.0-2015.08.1013.x86_64                                                                                                                                                                                                                          7/12
  Installing : libdbi-0.8.3-4.el6.x86_64                                                                                                                                                                                                                                  8/12
  Installing : perl-rrdtool-1.4.7-1.el6.rfx.x86_64                                                                                                                                                                                                                        9/12
  Installing : rrdtool-1.4.7-1.el6.rfx.x86_64                                                                                                                                                                                                                            10/12
  Installing : 1:ocf-server-1.3.0-2015.08.J2031.x86_64                                                                                                                                                                                                                   11/12
Non-fatal POSTIN scriptlet failure in rpm package 1:ocf-server-1.3.0-2015.08.J2031.x86_64
Creating ocf and ocf_view schemas...
Configuring OCF...
Setting up ocf privileges for jboss user
ln: creating symbolic link `/opmuser/.bash_profile': No such file or directory
Error occurred.  Printing log contents below.
Jan 08 17:58:11:  Fresh install of  ocf-server ....
Jan 08 17:58:11:  Checking for RRDtool
Jan 08 17:58:12:  rrdtool version=1.4.7
Jan 08 17:58:12:  Required rrdtool version 1.4.7 installed
Jan 08 17:58:12:  Checking for 7zip
Jan 08 17:58:12:  7za version=9.20
Jan 08 17:58:12:  Required 7za version 9.20 installed
uid=500(umadmin) gid=500(maintenance) groups=500(maintenance)
Jan 08 17:58:12:  Verifying if the user is already part of maintenance group.
Jan 08 17:58:12:  umadmin is already added into maintenance group
Starting MySQL...[  OK  ]
Jan 08 17:58:28:  Executing post-install in Fresh-install
Finished creating ocf and ocf_view schemas
Finished granting permissions to jboss user for ocf schemas
Jan 08 17:58:28:  support directory doesn't exits. Creating sym link of /support to /jail/support
Jan 08 17:58:28:  link for /bin/rbash does not exist. Created link for /bin/rbash
#includedir /etc/sudoers-netapp
Jan 08 17:58:28:  /etc/sudoers-netapp is already added in /etc/sudoers
warning: %post(ocf-server-1:1.3.0-2015.08.J2031.x86_64) scriptlet failed, exit status 1
Error in PREIN scriptlet in rpm package netapp-opm-

FAILURE: ocf-server package is not installed properly. Install ocf-server package and try again.
         Installer will exit now.

error: %pre(netapp-opm- scriptlet failed, exit status 255
error:   install: %pre scriptlet failed (2), skipping netapp-opm-
  Verifying  : libdbi-0.8.3-4.el6.x86_64                                                                                                                                                                                                                                  1/12
  Verifying  : perl-rrdtool-1.4.7-1.el6.rfx.x86_64                                                                                                                                                                                                                        2/12
  Verifying  : MySQL-client-5.6.26-1.el6.x86_64                                                                                                                                                                                                                           3/12
  Verifying  : ocie-au-1.3.0-2015.08.1013.x86_64                                                                                                                                                                                                                          4/12
  Verifying  : ocie-serverbase-1.3.0-2015.08.1013.x86_64                                                                                                                                                                                                                  5/12
  Verifying  : 1:ocf-server-1.3.0-2015.08.J2031.x86_64                                                                                                                                                                                                                    6/12
  Verifying  : xorg-x11-fonts-Type1-7.2-11.el6.noarch                                                                                                                                                                                                                     7/12
  Verifying  : rrdtool-1.4.7-1.el6.rfx.x86_64                                                                                                                                                                                                                             8/12
  Verifying  : MySQL-server-5.6.26-1.el6.x86_64                                                                                                                                                                                                                           9/12
  Verifying  : p7zip-9.20.1-2.el6.x86_64                                                                                                                                                                                                                                 10/12
  Verifying  : ocie-server-1.3.0-2015.08.1013.x86_64                                                                                                                                                                                                                     11/12
  Verifying  : netapp-opm-                                                                                                                                                                                                                      12/12

  MySQL-client.x86_64 0:5.6.26-1.el6       MySQL-server.x86_64 0:5.6.26-1.el6       ocf-server.x86_64 1:1.3.0-2015.08.J2031       ocie-au.x86_64 0:1.3.0-2015.08.1013       ocie-server.x86_64 0:1.3.0-2015.08.1013       ocie-serverbase.x86_64 0:1.3.0-2015.08.1013

Dependency Installed:
  libdbi.x86_64 0:0.8.3-4.el6                     p7zip.x86_64 0:9.20.1-2.el6                     perl-rrdtool.x86_64 0:1.4.7-1.el6.rfx                     rrdtool.x86_64 0:1.4.7-1.el6.rfx                     xorg-x11-fonts-Type1.noarch 0:7.2-11.el6

  netapp-opm.x86_64 0:




I'm having this issue as well, anybody manage to resolve?


What OPM version are you installing?

NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner