Oncommand and SIM 8.1 RC 1 7 Mode. Volumes are not shown in Oncommand

[hondasuschi]

Data Onta
8.1 RC1 Netapp Simulator 7 Mode does not show volumes in Oncommand 5.0 Ops
Manger neither in Performance Manager. Performance Object on LUN does not show
any value in PerfM.  All other objects are shown. Aggr are shown …..

At least with 8.01 this was with OPS Mgr 4.0 working. Any idea ? DFM host diag is ok !   

[arunchak]

HI,

Assuming that you have done the following:

1. set the host credentials in OnCommand.

  2. can you paste the host diag output here.

3. Check if there are any monitoring errors in dfmmonitor.log    ---> find this in "/opt/NTAPdfm/log/dfmmonitor.log"   (equivalent location in windows).

Thanks,

  Arun

[hondasuschi]

Hi

OK, to be simple, I did just reinstalled all OnCommand and now is working. Still quite strange as all other 7.3 Sim where working and as well on 8.1 sim aggr where shown. But now ok.

Juerg