Solved: The remote server returned an error: (404) Not Found.

kramar · ‎2014-07-16

Customer is getting the above error intermittently during workflow execution, looking for help in how to diagnose further to find the cause. Occurs randomly at different steps in different workflows as well.

Thanks James

sinhaa · ‎2014-07-16

Can you check that the below service is not running. Stop it and mark it's startup as Manual

Display Name: World Wide Web Publishing Service

Service Name: W3SVC

This is often the problem.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

sinhaa · ‎2014-07-16

Can you check that the below service is not running. Stop it and mark it's startup as Manual

Display Name: World Wide Web Publishing Service

Service Name: W3SVC

This is often the problem.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

kramar · ‎2014-07-28

That was it thanks!

eagle01 · ‎2018-10-30

Hi together,

I've a problem with connecting from ONTAPI AV-Connector (Version 1.0.4) to a SVM on NAS Filer --> Error-Message

Configuration was checked . The configuration of SVM for virus scanning on the filer was checked - all ok.

Any ideas?

Thx for help

d_ellis · ‎2015-11-04

Hello,

I'm currently running WFA 3.0P1 on Server 2012 and have experienced the same error mentioned above. After checking IIS and W3PS, neither services are running or installed. Any ideas on what else might be causing this?

Thanks,

David