Re: UCS 62xx and Oncommand Balance

COMITSUPPORT · ‎2013-09-19

Regarding the Balance Documentation https://library.netapp.com/ecm/ecm_download_file/ECMP1141808 to configure discoveries for the CISCO switches you have to configure the following items:

Balance has the following Cisco discovery requirements:

•

In Balance, create credentials for accessing the switch. On the

Add credentials

page:

• Leave the Login field blank.

• For the Password field, type the SNMP community name password. Default is

public

. If an

SNMP community name does not exist, use the Cisco management software to create it.

• For the FQDN/IP Address field, type the switch IP address.

In our case we are not possible to communicate with the switches

Could you please advice?

Thank you

Aggelos

plauterb · ‎2013-09-19

Is there a specific error or message you are getting? There are a KB articles that might help.

COMITSUPPORT · ‎2013-10-08

Hello Peter,

We want to configure SNMP to communicate from Balance 4.1.1.0 to UCS 6200 FI-1

The problem is discovery, Error:Auth or Conenct Failure

Not able to establish contact with SNMP agent at 10.50.1.31 using provided community string

Statistics: OK

We tried also the links below but we’ve got the same results

Do you have any similar installation to any customer?

Please advice

Thanks