Active IQ Unified Manager Discussions

different Volume Percent-Values & which Value takes Autgrow?

memoneu
2,697 Views

Hi Guys,

 

so before i search to long for a solution....i open an Entry, maybe you could help me.

 

I noticed that exists different Used-Values by showing the Volume details (Cdot-Filer)....but from which Percentage-Value starts the AutoSize? in my case 73% or 75% 

 

filer01::> volume show volume_esx_04 -fields percent-used,autosize-grow-threshold-percent,size
vserver     volume                 size percent-used autosize-grow-threshold-percent
----------- ---------------------- ---- ------------ -------------------------------
filer01_svm01 volume_esx_04 9TB  75%          93%


filer01::> df -h volume_esx_04
Filesystem               total       used      avail capacity  Mounted on                 Vserver
/vol/volume_esx_04/
                        8294GB     6038GB     2256GB      73%  /volume_esx_04    filer01_svm01
/vol/volume_esx_04/.snapshot
                         921GB      393GB      527GB      43%  /volume_esx_04/.snapshot
                                                                                          filer01_svm01
2 entries were displayed.

thanks

best regards

Mario

 

1 ACCEPTED SOLUTION

Anoop
2,683 Views

Hi,

 

As per the example shown, the AutoSize would be triggered once the 75% would reach 93%. Hope this helps.

 

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

1 REPLY 1

Anoop
2,684 Views

Hi,

 

As per the example shown, the AutoSize would be triggered once the 75% would reach 93%. Hope this helps.

 

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Public